Loading ...
Loading ...
Loading ...
9
Insert Locking Hose (Fig. H)
NOTE: Use ONLY the Metal Lined Hose and Metal
Accessories provided with this Ash Vacuum.
1. Align Hose Tabs with Vacuum Inlet and insert the
Locking End of the Hose into the Vacuum Inlet of the
Vacuum Drum, as shown.
2. Rotate the Hose clockwise to lock into place.
3. To remove the Hose from the Vacuum, rotate the
Locking Hose Counterclockwise and pull the Hose out
of the Vacuum Inlet.
Fig. H
Inlet
Locking Hose
(Metal Lined)
with LED Light
ROTATE HOSE
CLOCKWISE
TO LOCK
Hose Locking End
Hose Assembly (Figs. I & J)
1. Slide the Round End of the Extension Nozzle into the
smaller Tapered End of the Wand Nozzle.
Fig. I
Wand
Nozzle
Extension
Nozzle
2. Loosen the Two LED Assembly Screws, located at the
bottom of the LED Lighted Nozzle.
3 Slide the Wand Nozzle through the LED Assembly and
into the Rubber Hose Fitting.
4. Retighten the Two LED Assembly Screws to secure the
LED Assembly to the Hose Assembly.
Fig. J
LED Lighted
Nozzle
Screws (2)
Wand Nozzle
SP7088-2 CMXEVBE175850.indb 9 10/24/19 11:59 AM
Loading ...
Loading ...
Loading ...