Loading ...
Loading ...
Loading ...
11
Hose Assembly Storage (Fig. O)
Wrap the Hose around the top of the cooled Powerhead
Assembly, positioning the Hose under the Carry Handle/
Hose Wrap Area.
CAUTION:
Do not operate vacuum while the hose or
accessories are stored on the wet/dry vacuum’s
powerhead assembly.
Fig. O
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings blocked;
keep free of dust, lint, hair or anything that may reduce
air flow.
!
Hose Wrap
Area
Hose
Accessory Storage (Fig. N)
The Accessories can be stored on the rear of the Powerhead
Assembly by placing each Accessory into the Powerhead
Assembly Slots.
Fig. N
Powerhead
Assembly
Slots (2)
Accessories
Power Cord Storage (Fig. M)
The Power Cord should be wrapped around the Powerhead
Assembly Carry Handle.
Snap the Cord Clip onto the Power Cord, to secure in place.
Fig. M
Power
Cord
Powerhead
Assembly
Cord
Storage
Cord Clip
WARNING:
To prevent serious injury from electrical shock,
stop vacuum use immediately if the power cord is
damaged. Take the vacuum to a qualified service dealer
for inspection and possible repair.
!
!
SP7088-2 CMXEVBE175850.indb 11 10/24/19 11:59 AM
Loading ...
Loading ...
Loading ...