Loading ...
Loading ...
Loading ...
8
Powerhead Assembly (Figs. E & F)
1. Line up front of Powerhead Assembly with Vacuum
Port located on the front of the Drum, as shown.
2. Place Powerhead Assembly on top of Drum.
3. Be sure Powerhead Assembly completely covers the
top of the Drum so leakage does not occur.
4. Rotate the Latches on each side of the Drum,
positioning the Latch Hooks over the Lip of the
Powerhead Assembly.
5. Snap down the bottom edge of the Latches to secure
the Powerhead Assembly to the Drum.
INSTALLATION
Fig. E
Powerhead Disassembly (Fig. G)
Fig. F
Vacuum
Port
Drum
Powerhead
Assembly
Lip
ROTATE
LATCH
UP
SNAP
DOWN
LATCH
Powerhead
Assembly
Latch
Fig. G
1. Grasp the Drum Latches on both the right and left side
of the Vacuum.
2. Slowly pull the bottom of the Latches up and away
from the Drum.
3. The top of the Latches will then be free of the
Powerhead Assembly.
4. Lift the Powerhead Assembly from the Drum and place
it on a dry surface.
WARNING:
For your own safety, never connect plug to
power source outlet until all assembly steps
are complete and you have read and under-
stood the safety and operation instructions.
Do not operate vacuum with any parts damaged or
missing.
!
SNAP
DOWN
LATCH
Latches
ROTATE
LATCH
UP
Powerhead Assembly
Lip
SP7088-2 CMXEVBE175850.indb 8 10/24/19 11:59 AM
Loading ...
Loading ...
Loading ...