Loading ...
Loading ...
Loading ...
13
NOTE: Do not store the Vacuum immediately after Ash
removal or other use in a confined area or enclosed space.
Allow the Powerhead Assembly to cool and remove Ash
from Drum before storage.
1. Grasp the Drum Latches on both sides of the
Powerhead Assembly.
2. Slowly Pull Up on the Drum Latches, away from the
Drum.
3. The top of the Latches will be free of the Powerhead
Assembly.
Emptying the Vacuum Drum (Figs. Q & R)
WARNING:
To reduce the risk of injury from accidental starting,
unplug power cord before emptying the vacuum
drum.
!
Fig. Q
Drum
PULL
LATCH
UP AND
AWAY
ROTATE
LATCH
DOWN
ROTA
TE
LATCH
DOWN
PULL
LATCH
UP AND
AWAY
Latch
Latch
NOTE: Be sure the Ash is cool prior to dumping the
contents into the proper waste disposal container.
4. Lift up on the Powerhead Assembly and set it on a
clean dry area.
5. Empty the Drum into the proper waste disposal
container.
6. Inspect the Filter per the “Filter Removal and
Installation” Section of this Manual.
7. Reassemble the Powerhead Assembly to the Drum.
Drum
Cold Ash
Fig. R
CAUTION:
To reduce the risk of hearing damage, wear ear
protectors when using the Vacuum for an extended
time or in a noisy area.
!
SP7088-2 CMXEVBE175850.indb 13 10/24/19 11:59 AM
Loading ...
Loading ...
Loading ...