Loading ...
Loading ...
Loading ...
@ 32 52RV530U EN.book Page 46 Wednesday, Janu_y 30, 2008 3:54 PM
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the DiGiTAL AUDIO OUT terminal
on the TV (see "Connecting a digital audio system" on
page 18).
To select the optical audio output format:
1
2
3
From the Audio menu, highlight Audio Setup and press
0.
In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press @.
Usingthe Dolby® Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
digital to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
1
2
3
From the Audio menu, highlight Audio Setup and press
@.
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected, the
audio is output with minimal compression.
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press @.
Note:
• This item wi//be grayed out for NTSC signals, Video,
ColorStream, HDMI, and PC inputs.
• The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
Usingthe Locksmenu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Control Panel
Lock, Game Timer, and New PIN Code features. You can use
these features after entering the correct PIN code.
Entering the PIN code
1 ontheremotecontrolorTVcontrolpanelpressM_oand
highlight the Locks menu icon.
2
Enable Rating Blocking Off
Edit Rating Limits
_h_i_ gio_ ..................................................................................................................
Input Lock Off
coniioiPaneiLock ...........................0if
Game Timer Off
New PIN Code
Press V, which displays the PIN code entry screen.
• The Lock System screen (below) appears if a PIN
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press @.
• The Locks/Active screen appears if the PIN code is
already stored. Use the Number buttons to enter your
four-digit code and press _.
If the wrong PIN code is entered, the message "Incorrect PIN
code, please try again!" appears. Highlight Retry and press
@. Enter the code again and press @.
When the correct PIN code is entered, the Locks menu opens.
If you cannot remember your PIN code
RECALL
While the PIN code entering screen is displayed, press ©
four rimes within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
46
RV530U (ELF) Web 213:276
Loading ...
Loading ...
Loading ...