Loading ...
Loading ...
Loading ...
68 GETTING TO KNOW YOUR VEHICLE
Power Liftgate Malfunction Procedure:
1. In the event of a power malfunction to the
liftgate, the liftgate can be released by
accessing the service release feature in the
latch. This can be done using a 3 mm
diameter screwdriver.
2. From inside the gate, an eyelet can be seen.
Place the screwdriver in the eyelet.
3. Rotate the screwdriver handle to actuate the
lever and release the latch.
4. If liftgate is left open for an extended period of
time, the liftgate may need to be closed
manually to reset power liftgate functionality.
NOTE:
The liftgate can also be opened manually by
pushing the electronic liftgate release handle and
pulling upward in one fluid motion.
TO LOCK/CLOSE THE LIFTGATE
There are several different ways to close the
liftgate:
Manually by grabbing the liftgate closing handle
and pulling in a downward motion to close the
liftgate. Release the handle when the liftgate
takes over the closing effort.
Key fob liftgate button (if equipped)
Hands-Free (if equipped)
Liftgate instrument panel button (if equipped)
Power Liftgate button on the pillar in the cargo
area (if equipped)
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, pushing the Keyless
Enter ‘n Go™ — Passive Entry lock/push button
located to the left of the back-up camera will lock
the vehicle only.
The power liftgate may be closed by pushing the
rear power liftgate button, located in the upper left
trim in the liftgate opening. Pushing the button will
only close the liftgate. This button cannot be used
to open the liftgate.
Rear Power Liftgate Button
HANDS-FREE LIFTGATE — IF EQUIPPED
Hands-Free Liftgate Activation Zone
WARNING!
Driving with the liftgate open can allow
poisonous exhaust gases into your vehicle. You
and your passengers could be injured by these
fumes. Keep the liftgate closed when you are
operating the vehicle.
22_KL_OM_EN_USC_t.book Page 68
Loading ...
Loading ...
Loading ...