Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 229
(Continued)
5. Remove the chocks.
6. Remove the scissors jack and wheel bolt
wrench from the spare wheel as an assembly.
Turn the jack screw to the left to loosen the
wheel bolt wrench, and remove the wrench
from the jack assembly.
Jack And Tool Assembly
NOTE:
The jack handle attaches to the side of the jack
with two attachment points. When the jack is
partially expanded, the tension between the two
attachment points holds the jack handle in place.
7. Remove the spare tire.
JACKING INSTRUCTIONS
Jack Warning Label
WARNING!
A loose tire or jack thrown forward in a collision
or hard stop could endanger the occupants of
the vehicle. Always stow the jack parts and the
spare tire in the places provided. Have the
deflated (flat) tire repaired or replaced
immediately.
WARNING!
Carefully follow these tire changing warnings to
help prevent personal injury or damage to your
vehicle:
Always park on a firm, level surface as far from
the edge of the roadway as possible before
raising the vehicle.
Turn on the Hazard Warning Flashers.
Apply the parking brake firmly and set an auto-
matic transmission in PARK.
Block the wheel diagonally opposite the wheel
to be raised.
Never start or run the engine with the vehicle
on a jack.
Do not let anyone sit in the vehicle when it is
on a jack.
Do not get under the vehicle when it is on a
jack. If you need to get under a raised vehicle,
take it to a service center where it can be
raised on a lift.
Only use the jack in the positions indicated
and for lifting this vehicle during a tire change.
If working on or near a roadway, be extremely
careful of motor traffic.
To ensure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with
the valve stem facing the ground.
WARNING!
7
22_KL_OM_EN_USC_t.book Page 229
Loading ...
Loading ...
Loading ...