Jeep® 2022 Cherokee suv 2022 JEEP CHEROKEE

User Manual - Page 104

For 2022 JEEP CHEROKEE.

PDF File Manual, 324 pages, Download pdf file

Loading ...
Loading ...
Loading ...
102 STARTING AND OPERATING
front and rear wheels while providing maximum
pulling power for loose, slippery road surfaces only.
Do not exceed 25 mph (40 km/h).
NOTE:
For further information on the various positions
and their intended usages Ú page 103.
SHIFTING PROCEDURES
Shifting Into 4WD LOW
With the vehicle at speeds of 0 to 3 mph (0 to
5 km/h), the ignition in the ON/RUN position and
the engine running, shift the transmission into
NEUTRAL (N), and push the 4WD LOW button once.
The 4WD LOW indicator light in the instrument
cluster will begin to flash and remain on solid when
the shift is complete.
4WD LOW Button
NOTE:
If shift conditions/interlocks are not met, a
message will flash from the instrument cluster
display with instructions on how to complete the
requested shift Ú page 74.
Shifting Out Of 4X4 LOW
With the vehicle at speeds of 0 to 3 mph (0 to
5 km/h), the ignition in the ON/RUN position and
the engine running, shift the transmission into
NEUTRAL (N), and push the 4WD LOW button once.
The 4WD LOW indicator light in the instrument
cluster will flash and go out when the shift is
complete.
NOTE:
If shift conditions/interlocks are not met, a
message will flash from the instrument cluster
display with instructions on how to complete the
requested shift Ú page 74.
Shifting into or out of 4WD LOW is possible with
the vehicle completely stopped; however, diffi-
culty may occur due to the mating clutch teeth not
being properly aligned. Several attempts may be
required for clutch teeth alignment and shift
completion to occur. The preferred method is with
the vehicle rolling 0 to 3 mph (0 to 5 km/h). If the
vehicle is moving faster than 3 mph (5 km/h), the
4WD system will not allow the shift.
REAR ELECTRONIC LOCKER SYSTEM
I
F EQUIPPED
The Rear Electronic Locker System features a
mechanical locking rear differential to provide
better traction in the 4WD LOW position. The REAR
LOCK button is on the Selec-Terrain Knob.
Activating The Rear Electronic Locker System
To activate the Rear Electronic Locker System, the
following conditions must be met:
1. The 4WD system must be in 4WD LOW.
2. The ignition in the ON/RUN position and the
engine running.
3. Vehicle speed must be below 15 mph
(24 km/h).
4. To engage the Rear Electronic Locker, push
the REAR LOCK button once.
Rear Lock Button
22_KL_OM_EN_USC_t.book Page 102
Loading ...
Loading ...
Loading ...