Loading ...
Loading ...
Loading ...
Before you begin
Read these instructions completely and
carefully.
Important--Save these instructions for
local inspector's use.
Important--Observe all governing codes
and ordinances.
NOTE TO INSTALLER--Be sure to leave
these instructions with the Consumer.
NOTE: This appliance must be properly
grounded.
Unless very knowledgeable in the installation
of this product, engage a professional installer.
ToolsYouWill Heed
• Flat blade screwdriver
• Electrician's pliers
• Duct tape
• Measuring tape or scale
• Carpenter's square
• Wrench or socket set
• Drill and drill bit
• Sheet metal screws
• Junction box
NO'I_: Installation of this unit requires 2 people.
Do not attempt to install without assistance.
Electrical Requirements
CAUTION: FOR PERSONAL SAFETY,
REMOVE HOUSE FUSE OR CIRCUIT
BREAKER BEFORE BEGINNING
INSTALLATION.
This appliance must be supplied with the
proper w)ltage and frequency, as listed in these
Installation Instructions, and connected to an
individual, properly grounded branch circuit,
protected by a circuit breaker or time delay fuse.
Proper electrical ratings should be verified
with listing on product's rating plate. The rating
plate is located on the right-hand side of the
exhaust plenum.
All wire connections must be made in accordance
with local codes and properly insulated. Check
with your local utility for governing electrical
codes and ordinances. In the absence of local
electrical codes, the National Electrical Code,
ANSI/NFPA No. 70-Latest Edition, governing
electric range installations, must be followed.
A copy of the National Electrical Code can be
obtained by writing to:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02260
NOTE: Electrical installation kit JXCK89
may be ordered separately and includes
all the parts necessary to connect the
cooktop to typical rough-in wiring.
30" Cooktop (Dimensions for reference only)
Unit must be vented to the outside!
,j _-- 21%s"
7
19"
Dia.
I'- 20_A/'
_--- 29%"
_--- 27_//,
28
Loading ...
Loading ...
Loading ...