Loading ...
Loading ...
Loading ...
OVEN CAVITY
Food spills containing sugar or milk products should be cleaned
when oven cools, as soon as possible after happening. At high
temperatures, sugar reacts with porcelain and staining, etching,
pitting or faint white spots can result.
Self-Cleaning models
• Self-Cleaning cycle:
See "Self-Cleaning Cycle" section.
Standard-Cleaning models
For easier cleaning, the oven door can be removed according to
the "Removable Oven Door" section.
• Oven cleaner:
Make sure room is well-ventilated. Do not let cleaner contact
gasket, thermostat or exterior surfaces because damage will
occur. Line the floor with newspaper. Follow product label
instructions.
OVEN RACKS
• Steel wool pad
• On Self-Cleaning models, the Self-Cleaning cycle:
See "Self-Cleaning Cycle" section first regarding racks.
BROILER PAN AND GRID
Do not clean in the Self-Cleaning cycle.
• Solution of 1/2cup (125 mL) ammonia to 1 gallon (3.75 L)
water:
Soak for 20 minutes, then scrub with scouring or steel wool
pad.
• Oven cleaner:
Place pan and grid on newspaper. Spray with oven cleaner.
Follow product label instructions.
• Mildly abrasive cleanser:
Scrub with wet scouring pad.
• Dishwasher
To Replace the Fluorescent Light Tube:
1. Unplug range or disconnect power.
2. Flip up the top of the backguard.
3. Grasp both ends of the fluorescent tube.
4. Turn the tube 90 ° in either direction until both ends come out
of the receptacles.
5. Replace tube, replace top of the control panel.
6. Plug in range or reconnect power.
The oven light is a standard 40-watt appliance bulb. It will come
on when the oven door is open. It will not work during the Self-
Cleaning cycle. On some models, when the oven door is closed,
press OVEN LIGHT to turn it on or off.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
To replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
The control panel glass can be removed for easier cleaning. Do
not clean the electronics behind the glass because damage can
Occur.
To Remove:
1. Remove control knobs by pulling straight out.
2. Release clips.
3. Remove glass by pulling slightly up and forward.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Plug in range or reconnect power.
19
Loading ...
Loading ...
Loading ...