Loading ...
Loading ...
Loading ...
User’s Manual
iv
Caution:
Risk of explosion if battery is replaced by an incorrect type.
Dispose the battery according to local regulations.
Never place batteries or devices on or in heating devices,
such as microwave ovens, stoves, or radiators. Batteries
may explode when overheated or its performance will be
degenerate and its service life will be decreased.
Do not use it in a location where is electrostatic and
magnetic greatly, otherwise, the safety devices may be
damaged, causing hidden trouble of safety.
If the battery leaks, and the electrolyte get into the eyes.
Do not wipe eyes, instead, rinse the eyes with clean running
water, and immediately seek medical attention. Otherwise,
eyes injury can result.
If the battery gives off an odor, generates heat, becomes
discolored or deformed, or in any way appear abnormal
during use, recharging or storage, immediately remove it
from the device or battery charge and stop using it.
Avoid charging batteries for more than a week, as
overcharging may shorten battery life. Over time, unused
batteries will discharge and must be recharged before use.
Disconnect chargers from power sources when not in use.
Use batteries only for their intended purposes.
Store the battery at 0°C to 40°C.
Avoid exposing your device and batteries to very cold or
very hot temperatures. Extreme temperatures can cause
the deformation of the device and reduce the charging
capacity and life of your device and batteries.
Prevent batteries from contacting metal objects, as this can
create a connection between the + and – terminals of your
batteries and lead to temporary or permanent battery
damage.
In case the battery terminals are dirt, clean the terminals
with a dry cloth before use. Otherwise power failure or
charge failure may occur due to the poor connection with
the instrument.
Be aware discharged batteries may cause fire. Follow all
local regulations when disposing of used batteries or devices.
Never crush or puncture the battery. Avoid exposing the
battery to high external pressure, which can lead to an
internal short circuit and overheating.
Loading ...
Loading ...
Loading ...