Loading ...
Loading ...
Loading ...
Page 29
INSTALLATION INSTRUCTIONS
• After nishing connecting the couple of the
quick connectors, pass drain hose and the
refrigerant pipes through the wall hole.
NOTE: The quick connector parts must be
placed outside of room. Using wall hole
sleeve, cap and neoprene to seal the
wall hole.
• In order to prevent the quick connector parts
from being exposed in the air, the sound
deadening pads are supposed to be used
during installation, see Fig. 4.
• Wrap up the quick connectors with the sound
deadening pads, pack down the pads solid as
tightly as shown in Fig. 5.
• At last, use the tape to wrap the connection
pipe and connecting cable together.
Connecting the Refrigerant Pipe to Outdoor Unit
CAUTION – For your safety, always wear goggles and work
gloves when connecting the pipes.
• The outdoor unit as shown in Fig.6.
• Do not remove the plastic seals from the outdoor unit and the
appropriate the refrigerant pipes until immediately before you
connect them, Fig.7.
Loading ...
Loading ...
Loading ...