Loading ...
Loading ...
Loading ...
27
vi. To access the channel EQ settings, rotate the MAIN/MENU knob to the INPUT EQ eld and PRESS
the MAIN/MENU knob.
d. The FX Send section accesses the sends to each respective effect. All FX sends are “post fader level,” so
when a user adjusts the channel fader, the same relative level or mute is reected on the channel FX send.
i. To access, navigate to the FX Send section and Press the MAIN/MENU knob.
ii. Navigate to the effect send you wish to change and press the MAIN/MENU knob.
. A clockwise turn will increase the effect send.
. A counter-clockwise turn will decrease the effect send.
. Press MAIN/MENU to save your edits.
. Press BACK to cancel your edits.
Settings
1. “BT Audio Pairing” enables Bluetooth audio pairing for up to 30 seconds. This setting turns off when a pairing
has been made, or after 30 seconds.
2. “BT Control Pairing” resets Bluetooth control pairing for up to 30 seconds with the JBL Pro Connect app. This
turns off when a pairing has been made, or after 30 seconds.
3. When activating BT pairing, a pairing window will pop-up indicating BT Pairing has been initiated. Once
successfully paired, this window will disappear.
4. “LCD Contrast” allows the user to adjust the LCD contrast between 0 and 100%.
5. “Firmware Version” shows the current rmware version loaded onto the speaker.
6. “Factory Reset” resets all settings in the speaker to factory default, including Bluetooth communication pairing.
7. To help prolong the life of your battery and conform with ErP regulatory guidelines, the EON ONE MK2 comes
equipped with an auto-sleep feature that operates when the unit is on battery.
a. to enable/disable, press MAIN/MENU on the ERP eld and toggle ON/OFF.
8. SLEEP denes how long it takes until your EON ONE MK2 goes into sleep mode when no audio is detected.
Loading ...
Loading ...
Loading ...