Loading ...
Loading ...
Loading ...
22
this setting can be lowered to compensate.
ix. “Level to Mix” sets the amount of nal delay signal that contributes to the FX Return fader.
. To adjust any parameter, navigate to the parameter using the MAIN/MENU knob. Press the
MAIN/MENU knob to access.
. Adjust the values by turning the knob CLOCKWISE or COUNTER-CLOCKWISE.
. Press the MAIN/MENU knob to accept these changes. Press the BACK button to cancel
these changes.
d. Chorus The FX Processing Chorus is designed to add a musically oriented light shimmer on rock or
ballad vocals and acoustic guitars. Chorus is often used very lightly to enhance the harmonic content and
character, to bring out more shine on pure wave types of natural musical sources.
i. “On/Off” When set to off, the Chorus input is disabled. This allows the current signal to “ring out”
until the current Chorus signal is completed. To end the Chorus process result immediately, turn
down the Chorus Level to Mix fader.
ii. “Reset” will set the Chorus processing settings to default settings.
iii. “Presets” offers users a quick selection of common setting combinations for fast selection in typical
use cases. These Chorus presets are named as descriptions of the types of common musical uses
they simulate. The user can select “Custom” and adjust all the settings themselves. Or they can
start with recalling one of the presets, listen, and then add any settings adjustments, which will
automatically load the new combination of settings into the “Custom” setting for further editing.
. Custom
. Slow Light
. Slow Deep
. Fast Light
. Fast Deep
. Smooth Vibrato
. High Pass
. Medium Narrow
iv. “Rate” adjusts the speed of vibration of the chorus effect.
v. “Depth” adjusts the length of time the chorus process takes to ring out over time.
vi. “Width” adjusts how wide the chorus process resonates above the source frequencies.
vii. “Level to Mix” is the amount of the Chorus signal sent to the FX Return fader, which then contributes
to the nal mix.
. To adjust any parameter, navigate to the parameter using the MAIN/MENU knob. Press the
MAIN/MENU knob to access.
. Adjust the values by turning the knob CLOCKWISE or COUNTER-CLOCKWISE.
. Press the MAIN/MENU knob to accept these changes. Press the BACK button to cancel these
changes.
Loading ...
Loading ...
Loading ...