EONONEMK2 User Manual

Loading ...

MIXER PANEL FUNCTIONS

C. Main Volume / Menu Encoder

Controls LCD Display

• Rotary encoder: In Menu - Clockwise down menu/Anti-clockwise up menu

• Press to select menu item

• + On Home screen, Main Level increase by rotating the knob clockwise.

+ On Home screen, Main Level decrease by rotating the knob counterclockwise. Main encoder with detent: 70+/-40gf.cm

D. Limit LED

Amplier is reaching clip.

E. Multifunction CH Volume

EON ONE MK2 has 2 unique operation modes of the mixer which can be toggled holding the back button for 2 seconds by

pressing a specic channel rotary:

• Mix Mode

• Channel Strip mode

F. Multifunction CH LED’s

Channel level represented by colors

Channel Strip Mode: Denotes the selected channel

For SSM signal detection information, please see SSM section.

G. Power Button

The Power Button is a momentary push button. It is used to toggle the unit between the On and Off states. When in the

Off state, a short press and release of the Power Button will put the unit into the On state. When in the Sleep state, a

press and hold of >2s.

H. USB Ports

• USB Type-A

• Standard USB2.0 Type-A port

• Connecting with device: Charging 2.0 (x2 USB)

I. 1/4” Balanced Pass Thru

This 1/4” Balanced output connector provides a method of sending audio out to an external source. If signal is present on all inputs,

the inputs will be summed and sent out as a mix: Can be adjusted in the pass through menu section.

J. 3 Combo XLR-1/4” Inputs

Three female XLR – 1⁄4” combination connectors (1 for each input) are used for the analog audio inputs.

K. 6.3mm Input

One female 6.3mm connectors (1 for each input) are used for the analog audio inputs.

L. 3.5mm Jack

Two channel single ended input, mono mixed as a single mixed channel.

M. Power Inlet

Inlet adapter for A/C power cable

Loading ...

User Manual - Page 15