EONONEMK2 User Manual

Loading ...

. Presets assist new users wanting to try quick examples of often-used reverb setting

combinations.

. The user can select “Custom” and adjust all the settings themselves. Or they can start with

one of the location description presets, listen, and then add any settings adjustments, which

automatically load the new combination of settings into the “Custom” setting for further

adjustments.

. Custom

. Room Small

. Room Medium

. Room Medium Bright

. Room Large

. Hall Medium

. Hall Medium Bright

. Hall Large

iv. The combination of “Size” and “Pre-delay Time” dene the reverb simulation in just two controls;

how big the room is (Size) and how far away the audience member feels they are in regard to the

performers.

. Size adjusts the theoretical size of the simulated room in short, medium, long or longer.

. Pre-delay simulates the ratio of time from the source signal to the listener to the delay of the

rst reection off the closest wall.

. A shorter pre-delay time will make the audience feel farther away from the source

. A longer pre-delay time will make the audience feel closer to the source.

v. The High Frequency parameter simulates how much high-frequency reections are in the reverb.

. Simulating the sound of a room with many metal or glass surfaces is an example of a scenario

with more high-frequency reections.

. Simulating the sound of a room with soft word or outdoor settings would be an example of less

high-frequency reections.

vi. The Low frequency parameter simulates the amount of bass building in the reverb.

. An indoor, hard surface room will accumulate more bass build-up.

. An outdoor simulation would generate less bass build-up.

vii. The Level to Mix Parameter is the amount of wet signal (or signal with reverb) that is sent back to

your main mix.

. Increasing the level to mix will create a more prominent reverb effect.

. Decreasing the level to mix will create a more subtle reverb effect.

viii. To adjust any parameter, navigate to the parameter using the MAIN/MENU knob. Press the MAIN/

MENU knob to access.

Loading ...

User Manual - Page 20