Loading ...
Loading ...
Loading ...
ii ¸ _
i¸¸
13.0AT Rev.l.7.indd 32-33
PROBLEM:Thetreadmillcircuitbreaker trips during a workouL
SOLUTIOR: Verifythe following:
• Makesurethetreadmiflis pluggedintoa dedicated20-ampcircuit.
• Verifythatyou do nothavethemachineonanextensioncordorsurgeprotector.
• Confirmthat the machineis not pluggedinto a GFChequippedoutletorona circuit that hasa GFCI-equippedoutlet on it.
PROBLEM: Therunning belt does not stay centered during a workout.
SOLUTIOS{:Verifythe following:
• Makesurethetreadmiflis ona levelsurface.
• Verifythat the beltis properlytightenedandcentered(Referto theAdjustmentsectionfor detaileddirections).
PROBLEM:Operatingspeed appears inaccurate.
SOLUTIOR: Auto-calibrate the treadmill:
• Poweronthe treadmilland havethesafetykeyin positionon the
console.Pressand hold theelevation"4-" andspeed"-" buttonsfor
approximate/ySsecondstoentertheEngineeringMode.Theconsole
will beepand "ENGO"appearsin thedisplay. DO NOTstand onrunning be!t wflile
• Pressthe Speed"+" or "-" buttonuntil"ENG2"appearsinthedisplay, calibrating-standon t,_eguide
• Press,"ENTER"to select.Press,"START"to begin.Thetreadmifl
runningbelt wifl beginto moveautomaticallyand the auto-cafibrafion
sequencewill properlysetandstorethespeedvalues.
• Uponsuccessfulcafibrafion,the treadmiflwiflbeepseveraltimes.The
consolewill automaticallyexitEngineeringModeandreturnto the
start-up screen.
rails. Treadmillwill fluctuate between
lowand high speedsfor several
mi.ut =unt,c=!ib.=tioni= mp!et ,
TROUBLESHOOTING- HEARTRATE
Checkyourexerciseenvironmentfor sourcesof interferencesuchas fluorescentlights, computers,undergroundfencing,home
securitysystemsorappliancescontaininglargemotors.Theseitemsmaycauseerraticheartratereadouts.
Youmayexperienceanerraticreadoutunderthe foflowingconditions:
• Grippingtheheartratehandlebarstootight. Tryto maintainmoderatepressurewhileholdingontothe heartrate handlebars.
• Constantmovementand vibrationdueto constantlyholdingtheheartratehandlebarswhileexercising.Ifyou arereceiving
erraticheartrate readouts,try to onlyholdthegrips longenoughto monitoryourheartrate.
• Whenyouarebreathingheavilyduringa workout.
• Whenyourhandsareconstrictedbywearinga ring.
• Whenyourhandsaredryorcold.Tryto moistenyourpalmsbyrubbingthem togetherto warm.
• Anyonewith heavyarrhythmia.
• Anyonewith arteriosclerosisor peripheralcirculationdisorder.
• Anyonewhoseskinonthe measuringpalmis especiallythick.
!f =bo!=tro=b!l=hooti, di!=,O!re=edyth= u=e==dt,rnth!=owe ,ff.
i PLEASECALLCUSTOMERTECHSUPPORTATTHENUMBERONTHEBACKPANEL
i I
Thefollowing information may be asked of you whenyou call. Pleasehave these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer TechSupport to serviceyour treadmifl they may need to ask detailed questions about the symptoms that are
occurring. Sometroubleshooting questions that may be asked are:
• flow long has this problem beenoccurring?
• Does this problem occur with everyuse? With every user?
If you are hearing a noise, does it come from the front or the back? Whatkind of noise is it (thumping, grinding, squeaking,
chirping etc.)?
flas the machine been lubricated and maintained per the maintenance schedule?
Answering these and other questions wifl give the technicians the ability to send proper replacement parts and the service necessary
to get you and your AFGtreadmill running again!
ii! il
Cleanliness of your treadmill and its operation environment will keep maintenance problems and service calls to a
minimum. For this reason, werecommendthat the followin_ preventivemaintenance schedulebe followed.
AFTEREACHUSE(DAILY)
Cleanand inspect, followin_ these steps:
Turnoff the treadmill with the on/off switch, then unplug the powercord at the waft outlet.
Wipedown the runnin_ belt, deck, motor cover,and consolecasin_ with a damp cloth. Neveruse solvents, as they
can cause damage to the treadmill.
,, Inspect the power cord. If the powercord is damaged, contact AFG.
Makesure the power cord is not underneaththe treadmill or in any other area whereit can becomepinched or cut.
Checkthe tension and alignment of the runnin_ belt. Make sure that the treadmill belt will not damage any other
componentson the treadmifl by bein_ misali_ned.
EVERYWEEK
Cleanunderneath the treadmill, followin_ these steps:
,, Turnoff the treadmill with the on/off switch, then unplug the powercord at the waft outlet.
,, Move the treadmill to a remote location.
,, Wipeor vacuumany dust particlesor otherobjectsthat mayhaveaccumulatedunderneaththe treadmill.
,, Return the treadmill to its previous position.
.._.o.............:................ ............ .............. ...................
EVERYMONTH_ IMPORTANT!
TurnOff the ireadmill w!th the on/off Switch; then unp!u8 the power cord at the wall oudet
ii Inspect all assemblybolts of the machine for proper dghtness, i
Turnoff the treadmill and wait 60 Secondsl
• Wait un!ilALL
Remove screws holdin_ motor cover to the frame, Remove the lower mastbolts in order to Sfide the motor cover
upwards, Sfiding the motor cove_ masts, be careful not to Scratchthe paint. Prop up the motor cover
Clean the motor anfl lower beard areato eliminate any lint or dust particles that may haveaccumulated. Failure to
may resu!t in
,, Vacuumand wipe down the belt with a damp cloth Vacuum any black/white particles that may accumulate around
the uniL Thesepartbles mayaccumulate from normal treadmill use. ....................
EVERY6 MONTHSOR150MILES
It is necessaryto lubricate your treadmill runnin_ deck everysix months
or _50 miles to maintain optimal performanceof your treadmill. Oncethe
treadmill reaches _50 miles, the console will prompt you to lubricate the
treadmill. Onlyuse lubricant provided byAFG/
,, TURNOFF THETREADMILLwith the on/off switch, then unplug the
power cord at the waft outlet.
Loosenboth the rear rollerbolts. (Forbest results, place two removable
marks on both sides of the frame and note roller position). Once
the belt is loosened,take the bottle of lubricant and apply it to the
entire top surface of the runnin_ deck. Tightenboth rear roller bolts
(matchin_ up the marks for properposition) to original position. After
you have applied lubricant, plu_ in the power cord, insert the safety
key,start the treadmill and walk on the belt for two minutes to spread
the lubricant.
Lubricate the air shocks with Teflonbased spray.
,, Oncelubrication is complete,reset the consolebypressin_ and holdin_
'STOP'and Speed'+' buttons for 5 seconds.
RINNINIBELT
RINNINIIEII
Pleasecontact AFGwith questions about applyin_ lubricant to your treadmill.
s
m
4/1/08 3:41:18PM
Loading ...
Loading ...