Loading ...
Loading ...
Loading ...
¸%%¸¸¸
MONTH MONTHLY GOAL
WEEK# DISTANCE CALORIE$ TIME
MONTHLY TOTALS:
MONTH MONTHLY GOAL
WEEK # I DISTANCE I CA/-ORIE$ I TIME
MONTHLY TOTALS:
ii ¸ _ /
i¸¸ i_
ii/iii _iiiiiii
W
MONTH MONTHLY GOAL
WEEK # DISTANCE CALORIE$ TIME
MONTHLY TOTALS:
13.0AT Rev.l.7.indd 30-31
COMMONPRODUCTQUESTIONS
ARETHESOUNDSMYTREADMILLMAKESNORMAL?
All treadmills make a certain typeof thumping noise due to the belt riding over the rollers, especially new
treadmills. Thisnoise will diminish over time, although maynot totally go away. Overtime, the belt wifl
stretch, causing the belt to ride smootherover the rollers.
WHYI$ THETREADMILLI PURCHASEDLOUDERTHANTHEONEATTHESTORE?
All fitness products seemquieter in a large store showroombecausethere is generally more backgroundnoise
than in your home.Also, there will be less reverberationon a carpetedconcretefloor than on a woodoverlay
floor. Sometimesa heavyrubber mat will help reducereverberation through the floor.If a fitness product is
placed close to a wall, there will be more reflected noise.
WHENSHOULDI BE WORRIEDABOUTA NOISE?
As long as the soundsyour treadmill makes are nolouder than a normal conversational tone of voice,it is
considerednormal noise.
TROUBLESHOOTING-TREADMILL
Yourtreadmill is designed to be reliable and easyto use.However,if you experiencea problem, please referencethe
troubleshootingguide listed below.
PROBLEM: Theconsoledoesnot light up and/or the belt doesnot move.
SOLUTION,", Verifythe following:
DOESTilEREDLIGNTONTilE ON/OFFSWITCNLIGNTUP?
IF YES..
,, Doublecheckthat all connectionsare secure,especially the consolecable. Unplugand reconnectthe console
cable to verify.
,, Makesure the consolecable is not pinched ordamaged in any way.
,, Turnthe power off, unplug the power cable and wait 60 seconds.Removemotor cover. Waituntil aft red LED
lights havegone off on the motor controlboardbeforeproceeding.Next,verify that none of the wiresconnected
to the lower boardare loose or disconnected.
IF NO:
0
0
0
Verifythat the outlet the machine is plugged into is functbnal. Doublecheck that the breakerhas not tripped,
it is on a dedicated 20-amp circuit, it is not on a GFCIequipped outlet, and it is not plugged into a power
strip/surge protector or extensioncord.
Thepowercord is not pinched or damagedand is properlyplugged into the outlet ANDthe machine.
Thepowerswitch is turned to the ONposition.
4/1/08 3:41:17PM
Loading ...
Loading ...
Loading ...