Loading ...
Loading ...
Loading ...
14
Install Appliance
The appliance is heavy. It is advisable to install it with a second person.
Mount to Cabinet
Fully insert the appliance and center it. Do not kink the electrical cable.
Screw the appliance into place.
7
Flush installation
Flush installation also requires:
▯ two side cleats to be attached inside the
cabinet frame, recessed from the front
▯ a
5
/
16
" (8 mm) baseplate underneath the unit
body.
Electrical Installation
The model stated on the front cover is rated at 120V
AC, 60 Hz and uses a NEMA 5-20 plug to connect to
a dedicated 120 V microwave circuit.
Electrical Requirements:
▯ a three prong grounded outlet
▯ 120 V, 60 Hz, AC only
▯ 20 Amp electrical supply with a fuse or a
circuit breaker
This product must be connected to a supply circuit
of the proper voltage and frequency. Wire size must
conform to the requirements of the National
Electric Code or the prevailing local code for this
rating. The power supply cord and plug should be
brought to a separate 20-amp branch circuit single
grounded outlet. The outlet box should be located
inside the cabinet above the appliance (see section
Location Requirements). The outlet box and supply
circuit should be installed by a qualified electrician
and conform to the National Electrical Code or the
prevailing local code.
The voltage used must be the same as specified on
this microwave oven. Using a higher voltage is
dangerous and may result in a fire or oven damage.
Using a lower voltage will cause slow cooking. The
manufacturer is not responsible for any damages
resulting from the use of the oven with any voltage
other than specified.
Install Appliance
Note: The appliance is heavy. It is advisable to install
it with a second person.
NOTICE: Before installing the appliance, be sure to
verify the cabinet dimensions and electrical
connections.
Mount to Cabinet
1.
Fully insert the appliance and center it. Do not kink
the electrical cable.
2.
Screw the appliance into place.
PHDVXUHPHQWVLQLQFKHVPP
7RSYLHZ
6LGHYLHZ
ê
)OXVKLQVHW
GHSWK
ë
&OHDWV
&OHDWV
è¼ʓʘ
FOHDWV
ê
ë
RSHQLQJ
FXWRXW
KHLJKW
ʎ¼ʓʘ
IOXVK
FXWRXW
KHLJKW
EDVHSODWH
ʌ¼ʓʘ
èç¼ʓʘ
ë
èç¼ʓʘ
Model Connection
Circuit
Requirements
RV-2400S
NEMA 5-20
120 V,
60 Hz
20 Amps
Installation Requirements
WARNING:
The appliance is heavy. It is advisable to install it with a second
person.
Loading ...
Loading ...
Loading ...