Loading ...
Loading ...
Loading ...
glossary of terms
1. Kerr - the slot cut by the blade.
2.
.
.
for
Leading Edge - the edge of the workpiece
which is pushed into the blade first.
Sawblade Path - the area of the workpiece
directly in line with and moving toward the
sawblade edge.
Bevel - the ability to slant the table to make
angle cuts. An angle cutting operation through
the face of the board.
woodworking
5, Blade Tooth Set -the distance that the edge
of the sawblade tooth is bent (or set) outward
from the side of the blade.
6. Trailing Edge - the workpiece edge last cut by
the sawblade.
7. Workpiece - the item on which the cutting
operation is bebng performed.
contents
Warranty Information ............................................. 2
Safety Instruction for Scroll Saws .......................... 2
Motor Specs and Electrical Information .................. 5
Glossary of Terms for Woodworking ...................... 6
Unpacking and Checking Contents ....................... 6
Assembly ................................................................ 7
Setting Table for Horizontal or Bevel Cutting... 8
Aligning the Bevel Indicator .............................. 8
Removing and Installing Blades ............................. 10
Mounting the Scroll Saw ....................................... 12
Getting to Know Your Scroll Saw ........ 13
Operation ..................................... 15
Making Interior Cuts ...... 17
Maintenance ................... 18
Wiring Dtagram .................. 18
Recommended Accessories ............ 19
Trouble Shooting 19
Repair Parts ........................ 20
Notes ................................ 22
Service Inlormation ............ 24
unpacking and checking contents
TOOLS NEEDED
COMBINATION
SQUARE
MEDIUM FLAT BLADE SCREWDRIVER
WARNING: For your own safety never
connect plug to power source outlet until all
assembly steps are complete and you have
read and understand the safety and
operational instructions.
IMPORTANT: Never lift this saw by the arm
which holds the blade or damage will occur
to your saw.
Separate all parts from packaging materials ano
check each item with illustration and "Table of
Loose Parts". Make certain all items are accounted
for before discarding any packaging material.
If any parts are missing, do not attempt to
assemble the Scroll Saw, plug in the power cord or
turn the switch on until the missing parts are
obta=ned and installed correctly
Table of Loose Parts
A 16" Scroll Sawll .........
B Blade Guard ..........
C Owner's Manual .
D Loose Parts Bag contalntng
Blade .............
Switch Key ......
Qty,
1
!
1
. 1
NOTE: Hardware to mount this scroll saw to a
bench or leg set is _supplied. See mounting
instructions for recommended hardware s=ze
6
Loading ...
Loading ...
Loading ...