Loading ...
Loading ...
Loading ...
maintenance
WARNING: For your own safety, turn switch
"OFF", remove key and remove plug from
power source outlet before maintaining or
lubricating your saw,
GENERAL
An occasional coat of paste wax on the work table will
allow the wood being cut to glide smoothly across the
work surface.
MOTOR
tf the power cord is worn, cut or damaged in any way,
have it replaced immediately.
Do not attempt to oil the motor bearings or service
the motor internal parts. _::,.
ARM BEARINGS ,'
Lubricate the arm bearings after 10 hours of use. Re- _,-_;'
of! after every 50 hours of use or whenever there is a .'"
squeak coming from the bearings. 'ii__// -
1. Turn saw on its side. ,,,' _-_-_._
2. Squirt a generous amount of SAE 30 oil around
the shaft end and bronze bearing.
3. Let the oil soak in overnight in this position.
4. Next day repeat the above procedure for the
opposite side of the saw.
wiring diagram
BLACK
WHITE
GREEN
SWITCH
WARNING: To avoid tire or shock, use only
recommended service parts and reassemble
exactly as originally assembled.
!8
Loading ...
Loading ...
Loading ...