Loading ...
Loading ...
Loading ...
mounting the scromlsaw to
1. When mounting this saw to a workbench a solid
wood bench is preferred over a plywood bench where
noise and vibration will be more noticeable.
2. Hardware to mount this saw to a workbench is
supplied with the saw. However, we recommend the
hardware used be no smaller than the following.
Description Qty.
Hex Head Screws, 114-20 x length required .............. 3
Flat Washers, 1/4 I.D............................................... 6
Lock Washers, 1/4 I.D............................................. 3
Hex Nuts, 1/4-20 .................................................... 6
3. A soft foam pad to place between your scroll saw
and workbench is NOT supplied with the saw. However,
we highly recommend the use of such a pad to reduce
noise and vibration.
Description Qty.
Soft foam pad such as carpet padding,
24"x 12 "x 1/2". ............................................... 1
Do NOT over tighten mounting bolts - leave some
cushion in the foam pad for absorbing noise and
vibration.
a bench
SCROLL SAW BASE
HEX HEAD SCREW_
WORKBENCH /
SCROLL SAW BASE
HEX HEAD SCREW_,
FLAT WASHER _
1/2" FOAMPAD_
(OPTIONAL) _ _ S! DE VIEW
WORKBE.C. , , J-
FLAT WASHER _::i "-ii__-:.:; " : i
4. If you prefer to mount your saw to a leg set, we
recommend the leg set for bench top tools which is
available through Sears Retail or Catalog Stores. The
number of this leg set is 9-22244. This leg set is an
accessory and instructions to mount the
scroll saw to this leg set are included in the leg set
package.
12
Loading ...
Loading ...
Loading ...