Loading ...
Loading ...
Loading ...
removing and installing blades
WARNING: To avoid injury from accidenta!
starting, always turn switch "OFF" and remove
switch key before removing or replacing the
blade. N KNOB
1. Loosen tension on blade by turning tension knob
counterclockwise ( _ ) about three full turns.
2. Remove blade by pulling torward on blade and
then lifting the blade through the access hole in the SLIGHT PRESSURE HERE
table.
Slight downward pressure against the upper arm __j_ _" _
may be helpful when removing blade from upper _ _f--_='°__
holder.
__--__ /_" _ BLADE GUARD REMOVED
_f_ ,,_ FORCLARITY
3. Look at the blade holders closely and notice the
blade slots and pin recesses in the blade holder. The
blade holder is made so you can position the blade for
cutting from the front or one side of the saw.
Cutting from the side of the saw will be necessary
when your workpiece exceeds 16 inches in length. For
0° bevel angle only.
BLADE GUARD REMOVED
FOR CLARITY
10
Loading ...
Loading ...
Loading ...