Loading ...
Loading ...
Loading ...
RADIANT BROILER
OWNER’S MANUAL 1199797 REV 0 (6/14)
PAGE
12
OF 40
Figure 7
Be sure all controls are turned off prior to disconnecting. After reconnecting, be sure all controls are turned off and all
pilots are lit.
NOTICE
Adequate means must be provided to limit the movement of the appliance without depending on the connector and
the quick-disconnect device or its associated piping to limit the appliance movement.
The restraining means should be attached to a frame member on the back of the unit.
INSTALLATION
Installation of Restraint
F
G
H
I
B
C
E
D
A
STEP 3: INSTALL BROILER CERAMICS
The broiler ceramic tiles must be installed before operating the broiler. Do the following for each of the two broiler
compartments:
1. Locate and unwrap 20 of the 40 ceramic tiles shipped with the broiler.
2. Lift the front of the burner bafe up, then pull the bafe forward and out of the broiler.
3. Position the ceramic tiles on both sides of both burners. The tile edges will rest on burner lips and side supports. Be
certain tiles are installed with cone-shaped projections pointing downward.
4. Replace the burner bafe.
Loading ...
Loading ...
Loading ...