Loading ...
Loading ...
Loading ...
57
EN
Shooting
2
Reducing camera shake (image stabilizer)
You can reduce the amount of camera shake that can occur when shooting in low light
situations or shooting with high magnifi cation. The image stabilizer starts when you
press the shutter button halfway.
1
Press the Q button and select the image stabilizer.
WB
AUTO
WBWBWB
AUTOAUTOAUTO
j
WB
AUTO
WBWBWB
AUTOAUTOAUTO
mmmm5050
M-ISM-IS
Focal Length
Sensor Shift + Digital
n
P
P
S-AFS-AF
1
M-ISM-IS
M-ISM-IS
1
F
FHD
60p
OFF
Image stabilizer
250250 F5.6
P
i
Image Stabilizer
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
0.00.0
01:02:03
01:02:03
10231023
AEL/AFL
U
Image stabilizer
2
Select an item using the front dial and press the Q button.
Still
picture
OFF Still-I.S. Off Image stabilizer is off.
S-IS1
All Direction
Shake I.S.
Image stabilizer is on.
S-IS2
Vertical Shake
I.S.
Image stabilization applies only to vertical
(Y) camera shake.
S-IS3
Horizontal
Shake I.S.
Image stabilization applies only to horizontal
(Z) camera shake. Use when panning the
camera horizontally with the camera held in
portrait orientation.
S-IS AUTO Auto I.S.
The camera detects the panning direction and
applies the appropriate image stabilization.
Movie
OFF Movie-I.S. Off Image stabilizer is off.
M-IS1
All Direction
Shake I.S.
The camera uses both sensor shift (VCM) and
electronic correction.
M-IS2
All Direction
Shake I.S.
The camera uses sensor shift (VCM)
correction only.
Electronic correction is not used.
Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded)
Use focal length information to reduce camera shake when shooting with lenses that are not
Micro Four Thirds or Four Thirds system lenses.
• Select [Image Stabilizer], press the INFO button, use HI to select a focal length, and
press Q.
• Choose a focal length between 8 mm and 1000 mm.
• Choose the value that most closely matches to the one that is printed on the lens.
Cautions
• The image stabilizer cannot correct excessive camera shake or camera shake that occurs
when the shutter speed is set to the slowest speed. In these cases, it is recommended
that you use a tripod.
• When using a tripod, set [Image Stabilizer] to [OFF].
• When using a lens with an image stabilization function switch, priority is given to the lens
side setting.
• When priority is being given to the lens side image stabilization and the camera side is set
to [S-IS AUTO], [S-IS1] is used instead of [S-IS AUTO].
• You may notice an operating sound or vibration when the image stabilizer is activated.
Loading ...
Loading ...
Loading ...