HeatFast HF75K User Manual

Loading ...

-6-

WARNING: Never leave the heater unattended while operating.

Disconnect the heater from its power source when not in use.

TO ATTACH THE GUARD

1. Remove the screws from the upper shell and set aside.

2. Align the holes in the Guard with the holes in the upper shell as

shown.

3. Secure the guard to the upper shell by inserng and ghtening the

screws.

TO ATTACH THE INTERCEPTOR

1. Remove the screws from the lower shell and set aside.

2. Align the holes in the Interceptor with the holes in the lower shell

as shown.

3. Secure the Interceptor to the lower shell by inserng and ghtening

the screws.

ASSEMBLY

GUARD ASSEMBLY (FOR CANADA ONLY)

FOR MODELS R45K AND R75K ONLY

1. Align the holes in the upper housing with the two mounng holes on the handle

as shown.

2. Secure handle through holes provided.

Screw

Handle

Interception

Guard

Interception

Guard

Handle

Air

Inlet

Fuel

Tank

Flange

Axle

Wheel

Support

Frame

Thermostat

Knob

Handle Installaon R45K / R75K

Models R125K / R175K / R215K

FOR MODELS WITH WHEELS

These models come complete with

wheels and handles. Wheels, handles

and mounng hardware are located in

the shipping carton.

1. Loosely secure the Axle Bracket

to the Wheel Support Frame.

2. Slide the axle through the Axle

Bracket.

3. Install the wheels on the axle,

with the valve facing outward.

4. Place the ﬂat washers and

fastening nut on the axle ends.

5. Tighten the Axle Brackets.

6. Posion the Height Adjustment

Pipe to align the hole as shown.

7. Insert and ghten the bolt (M8).

Handle Installaon HF45K / HF75K

Models HF125K / HF175K / HF215K

FOR MODELS HF45K AND HF75K ONLY

Loading ...

HeatFast HF75K 75,000 BTU Forced Air Kerosene Heater with Thermostat

User Manual - Page 6