Loading ...
Loading ...
Loading ...
9
Setting the MIN/SEC Timer
The MIN/SEC Timer is designed for accurate timing and is ideal for baking
delicate items such as biscuits, cookies, and popovers, and for precise broil-
ing. The MIN/SEC timer can be used at the same time the Bake Hours or
Start Time functions are in use. It can be used for timing up to 24 hours.
When setting the Timer, the time displayed will increase in 1 minute incre-
ments. When the Timer counts down to 1 minute, the timer alarm will give
two short beeps and the display changes from hours:minutes to seconds
only.
To program the MIN/SEC Timer
1. Press the MIN/SEC Timer button. The timer will display :00 and the word
timer will be displayed in the lower right corner.
2. Turn the Set Knob until the desired duration time is displayed.
The Timer is now programmed. The alarm will sound at the end of the count-
down. The program can be canceled anytime by setting the remaining time
to :00. To change back to the time-of-day, press the CLOCK button. Notice
that a small clock will be displayed in the upper right corner to indicate that
a program is in progress. The display will return automatically to the MIN/SEC
Timer after a few seconds.
Timer Alarm
At the end of a MIN/SEC Timer program or Bake Hours program, the alarm
will consist of three beeps followed by two beeps every 10 seconds until the
MIN/SEC Timer button is pressed. Whenever a valid function key is pressed
or when a control function starts automatically, one beep will be sounded.
When an invalid function key is pressed, two beeps will be sounded.
8
Using Your Oven
Electronic Timing Center
The Electronic Timing Center is used to program and control all timing func-
tions. It has five display and programming modes that are activated by the
four push buttons and the Set Knob. Both the Bake Hours mode and the
MIN/SEC Timer mode can be used to time cooking periods. These features
can even be used at the same time when both ovens are in use. However,
only Bake Hours and Self-Cleaning modes shut the oven off automatically
when the timed program is over. For example, you can time bake a casserole
in the upper oven using the Bake Hours mode, while broiling in the lower
oven using the MIN/SEC Timer. One oven can also be cleaned while timing
foods in the other oven using the MIN/SEC Timer.
Setting the Time-of-Day
The time-of-day must be set before any other program can be used. When
your oven is first connected to the power in your home, the timer display will
show --:--. To program the time-of-day:
1. Press the CLOCK button. 12:00 will be displayed with the word set in the
upper right corner.
2. Turn the Set Knob until the correct time-of-day is displayed. AM and PM
are not indicated.
3. Press the CLOCK button again. The word set will disappear and the cor-
rect time is now set into the timer.
The time-of-day can be changed by following steps 1 through 3. It cannot be
changed while there is a Bake Hours or Start Time cycle programmed into the
timer.
Loading ...
Loading ...
Loading ...