Loading ...
Loading ...
Loading ...
En
29
Changing the settings
dB
Frequency
! By default, the advanced talk over mode is set.
Press the [KEY DOWN/RESET] button of the left side
deck.
! [KEY DOWN/RESET] button lit: Advanced talk over mode
! [KEY DOWN/RESET] button off: Normal talk over mode
Changing the talk over function level
Sets the talk over function’s sound attenuation level.
! By default, the level is set to -18 dB.
Press the performance pad on the left side to select a
setting.
The currently selected setting can be understood by looking at which
pad lights.
–6 dB –12 dB –18 dB –24 dB
Adjusting the crossfader cut lag
Adjust the play (cut lag) on both edges of the crossfader. It can be
adjusted between 0 (0.74 mm) and 52 (5.94 mm) in units of 0.1 mm.
! By default, it is set to 6 (1.34 mm).
Turn the rotary selector on the left deck.
The current setting (0 to 52) is displayed by the lit condition of the chan-
nel level indicator.
!
Number of lit segments of the [CH3] channel level indicator:
Ten’s place
!
Number of lit segments of the [CH1] channel level indicator:
One’s place
Setting the microphone output of the
booth monitor
! By default, it is set to output microphone sound from the [BOOTH]
terminal.
Press the [BACK (VIEW)] button of the left side deck.
! [BACK (VIEW)] button lit: Outputs microphone sound from the
[BOOTH] terminal
! [BACK (VIEW)] button off: Does not output microphone sound from
the [BOOTH] terminal
Changing the peak limiter setting
Lessens sudden, unpleasant digital clipping of the master output.
! By default, the peak limiter is set to enabled.
Press the [LOAD PREPARE (AREA)] button of the left side
deck.
! [LOAD PREPARE (AREA)] button lit: Peak limiter enabled
! [LOAD PREPARE (AREA)] button off: Peak limiter disabled
Adjusting the brightness of jog ring
You can adjust the brightness of the illumination around the jog dial.
! The same setting is applied to the jog dials on the left and right
decks.
! By default, it is set to bright light.
Press the top of the jog dial.
Each time the top of the jog dial is pressed, the setting changes.
The brightness can be set in three levels: light, dark, and off. The current
setting can be understood by the jog ring lit condition.
About the setting utility software
The setting utility can be used to make the checks and settings
described below.
— Checking the status of this unit’s input selector switches
— Setting the audio data output from this unit to the computer
— Adjusting the buffer size (when ASIO is used)
— Checking the version of the driver software
Displaying the setting utility
For Windows 10/8.1
Click [Pioneer] > [DDJ-SZ2 Settings Utility] from [Apps view].
For Windows 7
Click [Start] menu > [All Programs] > [Pioneer] > [DDJ-SZ2] >
[DDJ-SZ2 Settings Utility].
For Mac OS X
Click [Macintosh HD] icon > [Application] > [Pioneer] > [DDJ-SZ2] >
[DDJ-SZ2 Settings Utility].
Setting the audio data output from this
unit to the computer
When Serato DJ is running and using this unit as the default audio
device, set the audio data output in Serato DJ.
Display the setting utility before starting.
1 Click the [CONTROLLER OUPUT] tab.
2 Click the [DDJ-SZ2 Audio Output] pull-down menu.
Select and set the audio data to be output to the computer from the flow
of audio signals inside this unit.
Loading ...
Loading ...
Loading ...