Loading ...
Loading ...
Loading ...
En
23
Advanced Operation
Analyzing tracks
When loading tracks onto the deck by pressing the rotary selector, the
tracks are analyzed, but it may take time to display the BPM and wave-
form until analysis is completed.
When the Serato DJ software is used as an offline player, tracks can be
analyzed ahead of time. For tracks whose analysis has been completed,
the BPM and waveform are displayed immediately when the tracks are
loaded onto the decks.
For details on using the Serato DJ software as an offline player and
instructions on analyzing tracks, see the Serato DJ software manual.
!
Depending on the number of track files, some time may be required
for analysis.
Using effects
Serato DJ has two effect units, FX1 and FX2. Those effects can be applied
to the selected deck or sampler sound (AUX). The following describes
how to operate this unit to assign an effect unit to channel 1.
Serato DJ effects unit screen display
Multi FX mode: Up to three effects can be selected per effect unit, and
each effect has one adjustable parameter.
1 1123
54 54 54
Single FX mode: One effect can be selected per effect unit and there are
multiple adjustable parameters.
231
544444
1 This displays the effect type.
2 This displays the effect time.
3 This displays the number of the deck to which the effect unit is
assigned.
4 This displays the effect parameter status.
5 This displays whether the effect is on or off.
Operating in the multi FX mode
1 Press the [TAP] button while pressing the [SHIFT]
button to switch Serato DJ’s DJ-FX mode to the multi FX
mode.
The mode switches between the multi FX mode and single FX mode each
time the buttons are operated.
2 Press the [FX1] button or [FX2] button of channel 1 to
select the effect unit to assign.
The number of the deck to which the effect is assigned is highlighted on
the Serato DJ screen.
3 Press the effect parameter 1 button while pressing
the [SHIFT] button to select the first effect type.
To select the second effect type, press the effect parameter 2 button
while pressing the [SHIFT] button.
To select the third effect type, press the effect parameter 3 button while
pressing the [SHIFT] button.
The currently selected effect type is displayed on the Serato DJ screen.
4 Press the effect parameter 1 button to turn the first
effect on.
Press the effect parameter 2 button to turn the second effect on.
Press the effect parameter 3 button to turn the third effect on.
The [ON] key for the corresponding effect is highlighted on the Serato
DJ screen.
5 Operate the effect parameter 1 control to adjust the
parameter of the first effect.
Operate the effect parameter 2 control to adjust the parameter of the
second effect.
Operate the effect parameter 3 control to adjust the parameter of the
third effect.
6 Turn the [FX BEATS] control to adjust the effect time.
! It is also possible to set the BPM value to be used as the basis for the
effect time from the interval at which the [TAP] button is tapped.
For details, see Switching the effect’s tempo mode on page 24 .
Loading ...
Loading ...
Loading ...