Loading ...
Loading ...
Loading ...
ASSEMBLY
HOW TO ASSEMBLE THE STEERING WHEEL
Use the fasteners shown below to installthe steering wheel The
fasteners are shown at fullsize.,
Q
(A) (B)
lx102 15x88
1.,
3,
Make sure the front wheels pointforward.,
Some models have an optional bellows, Slide the bellows
over the steering post,,Make sure thecollar ofthe bellows is
on top (Figure 3).,
Attachthe steering wheel to the steering post withthe fasten-
ers,,Tighten the fasteners,
Steering Wheel
Steenng Post
B
Bellows
Figure 3
CHECK THE TIRES
Check the air pressure inthe tires,,Tires with toomuch air pressure
will cause the unit to ride rough. Also, the wrong air pressure wilt
keep the mower housing from cutting level, The correct air pressure
(PSI) isas follows.
Front Tires 22 PSI (1.5 BAR)
Rear Tires 14 PSI (i BAR)
CHECKTHE DRIVEBRAKE
The drive brake can be easily checked as follows_
1. Set the parking brake.,See page 13_
2o Move the shift lever to the neutral (N) position°
3., Push the unit°
4. If the rear wheels rotate, adjust the drive brake,, See "How To
Check And Adjust The Drive Brake" in the Customer
Responsibilities section,,
CHECK THE BELTS
Check the routing of the belts. Make sure thebelts are not twisted.
Make sure the belts are inside all the belt guides (Figure 4)°
Transaxle Pulley
1tiler Putley
Mower Drive Belt
- - Figure 4
F-98668 9
Loading ...
Loading ...
Loading ...