Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENT
HOW TO REMOVE THE MOWER HOUSING
1,, Move the lift lever to the middle position°
2. Move the attachment clutch to the DISENGAGE position
(Figure 32),,
3o Disconnect the blade drive link from the pivot rod and brack-
et assembly., See illustration"C".
4o Remove the hair pins from the adjuster plates,, See illustra-
tions"A" and "B"o
5,, Move the mower housing to the left untilthe right side adjuster
plate separates from the hanger° See illustration"A".
6. Move the mower housing to the right until the left side adjuster
plate separates from the hanger,, See illustration "t3".
7., Remove the long pin from the front hanger. See illustration
8. Remove the mower drive belt from the stack pulley,.Slidethe
mower drive belt between the stack pulley and the belt
guide,,
9o Completelyturnthesteering wheel to the right.Pullthe mower
housing away from the left side of the unit.
HOW TO INSTALL THE MOWER HOUSING
1, Completelyturnthesteering wheel to the dghtoPushthemower
housing under the left side ofthe uniL
2, Slide the mower drive belt between the stack pulley andthe
belt guide. Putthe mower drive belt around the stack pulley.
Make sure the"V" side of the mower drive belt isagainst the
stack pulley° Also, make sure the mower drive belt is not
twisted.
3 Attach the mower housing to the front hanger with the long
pin. Fastenwith the washer and hair pin. See illustration "D",,
4o Attach the adjuster plates to the hangers with the hair pins.,
See illustrations "A" and "B'L
5, Connect lhe blade drive link to the pivot rod and bracket
assembly withthe fasteners,, See illustration"C"_
6 Move theattachment clutch to the ENGAGE position., Make
sure the mower drive belt is inside all the belt guides°
7. Make sure the mower housing is level See the instructions on
"How To LevelThe Mower Housing",.
8o Checktheoperationofthe attachment clutch., See theinstruc-
tionson"How To Adjust The Attachment Clutch"
AttachmentClutch
Hanger
HairPin
MowerDriveBelt
-..
UftLever
Blade Drive Link
Hanger
Blade Ddve Link
Pivot Rodand
BracketAssembly
FrontHanger
Figure 32
F-98668 27
Loading ...
Loading ...
Loading ...