Loading ...
Loading ...
Loading ...
EN
11
6 - Gas Cooktop Griddle Operation
Electric gas ignition
The griddle burner uses an electric glow wire located near
burner that ensures burner ignition. It is thermostatically
controlled to maintain a consistent temperature.
Topreventfoodfromsticking,itisnecessaryto“season”the
griddle prior to use.
ELECTRIC IGNITION
(A) IGNITION GLOW WIRE
To set:
• Turn the knob clockwise: the glow wire system will start
and when it will be to the maximum glow, the burner will
produce a flame.
• Thegriddlehasapower“ON”lightwhichglowswhen
the griddle thermostat is turned on, and will switch it
“OFF”whenitwillbetotheselectedtemperature.
Turning off the burner
Turn the knob counter clockwise as far as it will go to the
off position.
Ensure flame extinguishes fully.
GRIDDLE BURNER KNOB
ATTENTION
The range must be level for the griddle to operate properly.
CAUTION
• Do not overheat the griddle. This can damage the
coating of the griddle.
• Do not use metal utensils that can damage the griddle
surface.
• Always turn off when not in use or lower the heat
between cooking loads.
• Do not use the griddle for other purposes, for example,
as a cutting board or a storage shelf.
• Do not cook excessively greasy foods. The grease may
spill over.
• The griddle may become very hot. Use oven gloves
when placing or removing the griddle.
• Do not remove the griddle until the cooktop grates,
surfaces, and griddle itself cool down.
• The griddle is quite heavy. Use both hands when
placing or removing the griddle.
Loading ...
Loading ...
Loading ...