Loading ...
Loading ...
Loading ...
USE - 77914779647/A
e
Clock format
1. Select
Time format.
2. Select 12h or 24h.
3. Touch the CONFIRM button to
activate the required time format.
Demo Mode (for showrooms only)
1. Select
Demo Mode.
2. Select On.
3. Touch the CONFIRM button to
activate the demo mode.
Temperature Format
1. Select
Temperature format.
2. Select °C or °F.
3. Touch the
CONFIRM button to activate
the required temperature format.
Time display
1. Select
Show the time.
2. Select On.
3. Touch the CONFIRM button to
activate the time display.
Display brightness
1. Select
Display brightness.
2. Select from the options High - Medium -
Low.
3. Touch the CONFIRM button to confirm
the selection.
Restore settings
1. Select
Restore settings.
2. Touch the CONFIRM button to confirm
the selection.
Activates/deactivates the clock display
in the 12 or 24 hour format.
The Time format function is factory set to
24h.
The same as Show Room, when this
mode is activated, after a certain period
of inactivity, a demonstration of the
various screens that illustrate the
potential of the appliance is shown on
the display.
To use the appliance normally, set this
mode to Off.
Allows you to set the temperature scale
to degrees Celsius (°C) or degrees
Fahrenheit (°F).
The Temperature format function is
factory set to °C.
Activates/deactivates the clock display
when the oven is switched off.
The "Show the time" function is factory
set to Off.
If the "Show the time" function is set to
On, when the appliance is in standby it
displays the current time at low
brightness.
When the "Show the time" function is set
to On, the appliance consumes more
energy than in stand-by mode.
Only for SmegConnect models: if the
"Show the time" function is set to Off the
connectivity switches off automatically
when the clock goes into stand-by.
This allows the display brightness level
to be selected.
The Display brightness function is
factory set to High.
This restores all settings to the original
factory settings.
Loading ...
Loading ...
Loading ...