Loading ...
Loading ...
Loading ...
Using the On-Screen Display8
Use the system’s on–screen display to navigate menus and configure options and settings.
NOTE
To access the on-screen display, you must connect the included mouse and a monitor (not included) to the re-
corder. See 4 Basic System Setup, page 6 for full instructions.
8.1 Navigation Bar
The Navigation Bar along the bottom of the recorder’s Live View display allows you to access
the Main Menu and control basic functions of the recorder.
To show the Navigation Bar:
• Hover the mouse pointer near the bottom of the Live View screen.
1. Main Menu: See , page for full instructions on using the Main Menu.
2. Collapse Navigation Bar
3. Viewing Modes: Select how many channels are shown on screen during live viewing.
4. Previous / Next Channel(s): Display previous / next channel(s) in single or quad channel
viewing mode.
5. Sequence Mode: Start or stop Sequence Mode. In Sequence Mode, the system display will
automatically cycle through connected channels every few seconds.
6. Pan/Tilt/Zoom: Control and configure settings for Pan-Tilt-Zoom (PTZ) cameras. For full
instructions on connecting and using PTZ cameras, see 20 Pan/Tilt/Zoom (PTZ) Cameras,
page 92.
7. Camera: Click to open camera image settings. For full details, see 8.5 Camera Image Set-
tings, page 19.
8. Playback: Opens the Playback Menu. This allows you to search for video recordings saved
on the recorder’s hard drive. For details on using the Playback menu, see 10 Playback, page
26.
9. Alarm Status: View alarms in progress. See 17.5.5 Alarm for details.
10. Channel Info: Click to access status information about connected cameras.
11. Remote Device Search: Manage IP cameras over the network.
12. Network: View and configure network options, including setting a dynamic or static IP ad-
dress. For full instructions on configuring network options, see 17.6.1 Selecting DHCP or
Static IP Address (TCP/IP), page 71.
13. Hard Drive Manager: Configure hard drive read/write options (see 17.6.15 Configuring
Hard Drive Type, page 84 for details) or format drives (see 17.6.14 Formatting the Hard
Drive, page 83 for details).
14. USB Manager: Click to access options for connected USB thumb drives (not included).
You can backup video, logs, or system configurations and install firmware upgrades.
15. System Upgrade: Check for firmware upgrades. The system must be connected to the Inter-
net to check for or receive updates.
16. Warning Light & Siren — Deterrence Cameras Only: Click to activate warning lights
and sirens for all connected deterrence cameras. Click again to deactivate.
8.2 Quick Menu
The Quick Menu gives you quick access to functions which can also be accessed using the Nav-
igation Bar.
To open the Quick Menu:
#LX400113; r. 7.0/56940/56940; en-US 16
Loading ...
Loading ...
Loading ...