Loading ...
Loading ...
Loading ...
nstalling Your Refrigerator
How to Level Your Refrigerator
If your refi'igerator requires an ice maker water supply connection, proceed to How to connect the water supp|y
section before leveling your refrigerator.
I A CAUT,ON I
To protect personN property or unit from damage, observe the following:
* Protect soft vinyUor other flooring with cardboard, rugs, or other protective matefiN
* Do not use power tooUswhen performing UeveUing)rocedure
M_redalsNecded * sis"hex head driver * Level
[rout of re[r[g*erato_
* Make sure refrigerator cabinet is level _
from side to side by adjusting left and
right roller adjustment screws
, Turn stabilizing leg clockwise until firmly against
floor.
the above listed steps; turn roller adjustment
screws (A) 2 to 3 times ceunterc!0ckwise, so
that full weight of unit rests on stabilizing legs.
Using a level, mM_e sure #'ont of '_
%
refdgerator is _ " (dram) or ½ bubble
h@her tl, an back of re#_emto,: [
Z Reph, ce toe grille and br_,c'kct coverCs).
See markings on inside of toe griIIe to [
[,sure proper pl_,cement. I
Snap bottom portion into place first. Press [
down on top part of grille until top portion snaps
Hew to Adjust 1:he Temperature Contre|s
This refrigerator is designed to operate at a household temperature of 55° to 110°F (13° to 43° C). For initial temperature
setting, follow all five steps listed below. If doing a simple temperature modification for an operational unit, only steps 3
through 5 are required.
(i Locate :,:dg_er_tor cootro/s at the o:b'esh food )
top
[ compartment andb'eeze: controls at top Of #'eezer section. Seth
_ontrcl is set to Off
to 8 hours for adjustments to take effect.
: Turn control to next highest number if too warm _ |
Turn control to next lowest number if too cold. \___ |
* Allow 5 to 8 hours for adiustments to take effect.
How do I perform
a temperature test?
MateHagneeded
* 2thermometers measuring-5 °
m 50°F (-2i ° to !0°C)
* 2 drinking glasses
For Freezer
* Place thermometer in glass of
vegetable oil in middle of fieezer
and continue with step 3 of
YempeJ'atm'e Adjztsn:_em section.
IMPORTANT: Always start
temperature adjustments with
freezer section,
For RefrQerator
* Place them_ometer in glass of
water in middle of unit and
continue with step 3 of
Yempe_'am*'eA@tstmem section.
Loading ...
Loading ...
Loading ...