Loading ...
Loading ...
Loading ...
Freezer Features
Primary Features
i etween 0° to 2°F (-18 ° to -17° C), ice maker fills
with water and begins operating.
• AHow approximateUy 24 hours after installation to
receive first harvest of ice.
• Discard ice created within first 12 hours of operation
to verify system is flushed of impurities.
Operating hstructions
• Confirm ice bin is in pUaceand ice maker arm is
down. o o o
• After freezer section reaches 0 to 2 F (-18 to
-17 C), ice maker fills with water and begins
operating. "Youwill have a complete harvest of
ice approximately every 3 hours. , !.
• Stop ice production by raising L _ - .....
ice maker arm until click is heard. / _%, J
/ Joe maker will remain ,n the off [ x:-W iJ
She|yes
ice, Service Naek
To install and remove rack:
To install, sUide L-shaped
groove of sheUfdown over
back wall screw. Push rack back
until screw is stopped in L-shaped
groove (1). Slide front portion of
shelf over front wall screw (2).
To remove, perform above steps in reverse order.
I CAUTION I
To avoid property damage, observe the following:
• Do not force ice maker arm down or up.
• Do not place or store anything in ice storage bin.
D_'awe_'s
Wire Basket
To remove and install basket:
To remove basket, pull
out to full extension. Tilt up fro
of basket and pull straight out
To install, insert basket into refrigerator liner rails and
push back into place
Drawer gaskets (_,on,_,modc/_9
(Door assembly of drawer removed from illustration for
visual clarity)
To remove and replace top basket:
Remove basket by pulling
basket out to its full extension
and lift out.
Replace basket by
sliding into upper
molded railing_
To remove and replace botton
basket:
Remove basket by lifting basket from rail guides.
Replace basket by placing into rail guides.
I DANGER
To prevent accidental child entrapment or suffocation
risk,DO NOT remove the divider in the top freezer
basket.
Deer Sterage
i2
Loading ...
Loading ...
Loading ...