Loading ...
Loading ...
Loading ...
RULES FOR SAFE OPERATION (Continued)
KEEP TOOL DRY, CLEAN, AND FREE FROM
OIL AND GREASE. Always use a clean cloth
when cleaning. Never use brake fluids, gasoline,
petroleum-based products,or any solventsto
clean tool
A LARGE PIECE OF MATERIAL SHOULD BE
SUPPORTED while cutting.To minimize riskof
blade pinchingand kickback, always support
long workpieces. Saw may slip,walk or slide
while cutting long or heavy boards.
BEFORE MAKING A CUT, BE SURE ALL
ADJUSTMENTS ARE SECURE.
BEFORE CHANGING THE SETUP, REMOVING
COVERS, GUARDS OR BLADE, UNPLUG THE
SAW, AND REMOVE THE SWITCH KEY.
• DO NOT FEED THE MATERIAL TOO QUICKLY
while cutting. Do not force the workpiece against
the blade.
• NEVER CUT MORE THAN ONE WORKPIECE
AT A TIME. If making a stacked cut, all of the
pieces mustbe secured to each other with
masking tape or double sticktape to make one
workpiece. Do not put more than one workpiece
on the saw table at a time. Always hold the work
firmlyagainst the table. See page 18.
• AVOID CU'I-FING NAILS. Inspect for and
remove all nails from lumber before cutting.
• NEVER PERFORM LAYOUT, ASSEMBLY, OR
SETUP WORK ON THE TABLE while the
cutting tool isoperating.
• NEVER TOUCH BLADE or other moving parts
during use,
• NEVER START A TOOL WHEN THE BLADE IS
IN CONTACT WITH THE WORKPIECE. Clear
the table of debris before turning your scrollsaw
on,
ALLOW THE MOTOR TO COME UP TO FULL
SPEED before starting a cut.
FIRMLY CLAMP OR BOLT your scrollsaw to a
firm, level workbench or table. The most comfort-
able saw table height is at approximately hip
height.
• AVOID AWKWARD OPERATIONS A_D HAND
POSITIONS where a sudden slipcould cause
your hand to move intothe blade. ALWAYS
make sure you have good balance. Do not cut
pieces of material that are too small to hold
comfortablyin your hand.
• REPLACEMENT PARTS. All repairs, whether
electrical or mechanical, shouldbe made by
qualified service technician at a Sears store or
repair center.
_1= WARNING: When servicing use onlyidentical
Craftsman replacement parts. Use ofany other
parts may create a hazard or cause product
damage.
• NEVER USE IN AN EXPLOSIVE ATMO-
SPHERE. Normal sparkingof the motor could
ignitefumes.
• DO NOT OPERATE THIS TOOL WHILE UN-
DER THE INFLUENCE OF DRUGS, ALCOHOL,
OR ANY MEDICATION.
STAY ALERT AND EXERCISE CONTROL.
Watch what you are doingand use common
sense. Do not operate tool when you are tired.
Do not rush.
• MAKE SURE THE WORK AREA HAS AMPLE
LIGHTING tosee the work and that no obstruc-
tionswill interfere with safe operation BEFORE
performingany work using yoursaw.
• ALWAYS TURN OFF SAW before disconnecting
it, to avoidaccidental starting when reconnecting
to powersupply. NEVER leave the scrollsaw
unattendedwhile connected to a power source.
_. WARNING: Do not allow familiaritywith your
saw make you careless. Remember that a
careless fractionof a second is sufficientto inflict
severe injury.
SAVE THESE INSTRUCTIONS. Refer tothem
frequentlyand use to instructother users. If you
loan someone thistool, loan them these instruc-
tions also.
SAVE THESE INSTRUCTIONS
5
Loading ...
Loading ...
Loading ...