Loading ...
Loading ...
Loading ...
LOCK POST
See Figure 17.
To prevent unauthorizeduse ofyour scroll saw, we
suggest that you disconnectitfrom the power supply
and lockthe knob in the OFF position.A padlock with
a shackle of 5 mm or 3/16 in.diameter shouldbe
used. When the lock is installedand locked, as
illustrated,the switchis inoperable. Store the padlock
key in another location.
• To lock the saw in the OFF position, installa
padlock through the lock post beside the knob as
illustrated and lockthe padlock. (Padlock is not
supplied with the saw.)
,_ WARNING: Foryour own safety, always push
the knob OFF when machine is not in use. Also,
in the event of a power failure, push knob OFF.
Lock the scroll saw switch OFF with a padlock.
This will prevent the machine from starting up
again when the power comes back on. Failure to
heed this warning can resultin serious personal
injury.
INTERIOR SCROLL CUTTING
See Figure 18.
• One ofthe features of a scroll saw isthat it can
be used to make scroll cutson the interiorof a
board without breaking or cuttingthrough the
edge or perimeter of the board.
&
WARNING: To avoid possibleserious injury
from accidental starting,always turn the switch
OFF and remove plugfrom power source outlet
before removingor replacing the blade.
• To make interiorcuts in a board, remove the
scroll saw blade as explained in the Installing
Blades sectionon page 14.
• Drilla 114in. hole in the board to be used to
make interiorcuts.
• Place the board on the saw table withthe hole in
the board over the access hole in the table.
• Installblade through hole in board then adjust
the holddown foot and the blade tension. See
pages 14 and 15.
• When finished makingthe interiorscrollcuts,
simplyremove the blade from the blade holders
as describedin the Installing Blades section,
and remove the board from the table.
DRILLHOLE
INTERIOR
PADLOCK
ON/OFFKNOB
Fig. 17
Fig. 18
17
Loading ...
Loading ...
Loading ...