Loading ...
Loading ...
Loading ...
English 49
Troubleshooting
Problem Cause Action
The burners do not
burn evenly.
Surface burner
components and caps are
not assembled correctly
and level.
See page 42.
The surface burners are
dirty.
Clean the surface burner
components.
(See page 41.)
Very large or
yellow surface
burner ames.
The wrong burner orice
is installed.
Check the burner orice size.
Contact your installer if you
have the wrong orice (LP
gas instead of natural gas or
natural gas instead of LP gas).
Surface burners
light but oven
burners do not
light.
The oven door lock is
turned on.
The display will show the Lock
icon. Hold the oven door open
and Tap and hold START for
3 seconds. The oven will beep
and the Lock icon will turn off.
The Gas Pressure
Regulator shut off switch
is in the off position.
Call a qualied service
technician.
Oven
Problem Cause Action
The oven control
beeps and displays
an information
code.
There may be an issue
with your oven. See the
“Information codes” chart
on page 53.
Tap OFF, and then restart the
oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
The oven will not
turn on.
The oven is not
completely plugged into
the electrical outlet.
Make sure the electrical plug
is fully inserted into a live,
properly grounded outlet.
A fuse in your home
may be blown or the
circuit breaker may have
tripped.
Replace the fuse or reset the
circuit breaker.
The oven
temperature is too
hot or cold.
The oven thermostat
needs adjustment.
See page 34.
Loading ...
Loading ...
Loading ...