Loading ...
Loading ...
Loading ...
Control, Clock and Timer
Clock
The
clock
must be set for the
automatic oven timing functions
to
work properly. The time of day
cannot be changed during a TIME
BAKE
~yde.
To Set the Clock
Step 1. Touch the CLOCK pad.
Step 2. Press INCREASE or
DECREASE
ptid
to set the time
ot”
day.
Power Outage?
At’tcr
a
power outage, when power
is
resl(mxl
the display will
flash
and
(iITw
shown
wi]]
no
longer
be
correc[.
The display flashes until the clock
is
reset.
All other functions that
were in operation when the power
went
out will
have
to be
programmed again.
Timer
The timer does not control oven
operations. The maximum setting
on the timer is
9
hours and 55
minutes.
To Set The Timer
Step 1.
Touch the TIMER
ON/OFF
ptid.
Step 2. Press INCREASE or
DECREASE pad to set the amount
of
time on the timer.
The timer will start automatically
within
a
few
seconds of releasing
the pad.
mllm
The timer,
as
you
are
setting it,
will display seconds until
60
seconds is reached.
Then it will display minutes
and
seconds until
60
minutes is
reached.
To Reset Timer
Touch TIMER pad and then press
INCREASE or DECREASE pad
until the time you want shows on
the display.
To Cancel Timer
Press & hold TIMER pad until the
word “TIMER” quits flashing on
the display (about 4 seconds).
Timer Tones
The timer tone is 3 beeps followed
by 1 beep every 6 seconds. If you
would like to remove the one beep
every 6 seconds, press & hold
CLEAWOFF for 10 seconds.
To return the tone of 1 beep every
6 seconds, press & hold
CLEAR/OFF for 10 seconds.
Error Message
If “F” and a number flash on
display, this indicates a function
error code. Touch CLEAR/OFF
pad. If function error code does not
clear, disconnect power to the oven
and call for service.
After 60 minutes, it will display
hours (
“HR”
now appears in
display)
and
minutes
until
the
maximum time of
9
hours
and
55
minutes is reached.
7
Loading ...
Loading ...
Loading ...