Loading ...
Loading ...
Loading ...
21
5.2.3 WiFi Add
Pairing the camera to the NVR and configure the cameras to work wirelessly.
The main function of ‘WiFi Add’ is to pair the IP cameras to NVR, and transfer the NVR’s Wi-
Fi information (SSID & Password) to the IP cameras. Once the information has been transfer
to the IP camera, it will be added to the NVR’s network with an IP address starting with 172.
When it is done the camera will be added to the system and will automatically connect to the
NVR system.
When to use Match Code:
Adding new camera to your Crystal Vision NVR system or re-pair camera to NVR when
the camera lost connection to the system.
Note:
IP cameras in pre-packed kits have already been paired to NVR. So cameras will auto
connect to NVR once the cameras are powered on using the provided power adapters.
How to pair (sync) camera using WiFi add:
1. Power on the system and the camera using
the provided power adapter.
2. From the system, please go to ‘Video
manage’ and click ‘WiFi Add’.
3. Once you see the WiFi add screen display,
press & hold the ‘Sync’ button for 5 second to
enter the wireless sync mode.
4. Please allow 30~60 second for the system to
search and add the camera into the system.
5. When the system is done adding the camera,
click on the ‘Exit’ to stop the pairing process.
6. Once you are done the camera you have
added should be listed at the bottom chart
indicating the camera has been sync to the
system.
7. Click ‘OK’ to save & exit the system and you
are done.
Tip: If you have an issue syncing the camera to
the system, please press & hold the ‘Sync’ button
for 10 second to reset and try again. The reset
process may take up to 1~2 min.
Loading ...
Loading ...
Loading ...