Loading ...
Loading ...
Loading ...
W415-2349 / A / 10.31.19
EN
42
fi nishing
7.0 wiring diagram
ON / OFF
SWITCH
ACS
(where
applicable)
GROUND
DFC
VALVE
ORANGE
GREEN
GROUND
EYELET
ON / OFF
IPI / CPI
DISCONNECT THESE
CONNECTIONS TO THE
ON/OFF SWITCH. CONNECT
AN OPTIONAL THERMOSTAT
OR REMOTE CONTROL AND
(IF ALLOWED WITH THIS
APPLIANCE) A “B” VENT
ADAPTOR.
DC SUPPLY
TRANSFORMER
ELECTRONIC
VALVE
OFF ON
BATTERY
HOUSING
WHERE APPLICABLE, APPLIANCES WITH “B” VENT ADAPTORS MUST HAVE THE SPILL SWITCH WIRED IN
SERIES WITH EITHER THE EXISTING SWITCH OR OPTIONAL WALL SWITCH, THERMOSTAT OR REMOTE.
• Do not wire 110 volts to the valve or wall switch.
!
WARNING
This appliance comes equipped with a battery back-up. If this backup is used, install 4 ‘AA’ batteries (not sup-
-
plied) into the holder and connect to the wire harness. Connect the battery holder to the wire harness before
using the appliance. Place near the DFC board. If the backup is used, it must be connect to this 6 volt battery
pack (supplied).
note:
Legend
DFC
Digital Fireplace Control
DC
Direct Current
IPI
Intermittent Pilot Ignition
CPI
Continuous Pilot Ignition (with 7-day timer)
ACS
Anti-Condensation Switch (IPI / CPI)
Loading ...
Loading ...
Loading ...