Loading ...
Loading ...
Loading ...
OPERATING THE GRILL
21
-----------------------------------
WARNING
----------------------------------
Read and follow all warnings and instructions contained in the preceding sections of this manual.
-----------------------------------------------------------------------------------
Control Panel
-----------------------------------------------------------------------------------
Target
temperature
Temperature
adjustment knob
Chamber
temperature
Probe 1
temperature
Grill light
on/off
Probe 2
temperature
Hopper light
on/off
Prime
button
Power
on/off
Connection via
Bluetooth
®
Connection via
WiFi
Target temperature:• Target temperature your grill will heat to and maintain. This temperature can be
changed at any time.
Chamber temperature:• Current internal temperature of the cooking chamber.
Probe 1 temperature:• Temperature reading from the built-in food probe 1.
Probe 2 temperature: •Temperature reading from the built-in food probe 2.
Grill light:• On/off button that actuates the built-in lights inside your cooking chamber.
Hopper light: •On/off button that actuates the built-in light inside the pellet hopper.
Prime button: •Holding down the Prime button will actuate the pellet auger at an accelerated rate for as
long as you hold it. There will be an audible cue as the prime button is depressed. While not needed for
regular operation, this can reduce the time it takes to start your grill.
Power on/off:• Turns the grill on or off. When the grill is turned on it will automatically heat to the default
set temp of 350° F. To turn the grill off hold the Power button for several seconds until control panel shuts
down. When the grill is turned off the internal fan will stay on for 10 minutes to ensure any remaining
embers are extinguished.
WARNING: After operation ALWAYS use the power off function and DO NOT unplug your grill
before the fan shuts off on its own. Failure to follow these instructions can result in a fire inside
your pellet hopper.
Temperature adjustment knob: •
To adjust the set temperature of the grill press the dial once and the Target Temperature number will •
start flashing. Turn the knob clockwise for hotter and counterclockwise for cooler. After you have
arrived at the desired temperature, wait a few seconds without touching the dial to allow the number to
stop flashing, it is now set.
To adjust the set temperature of the food probes press the dial twice for Probe 1 and press the dial •
three times for Probe 2. Follow the same procedure as adjusting the set temperature of the grill. When
the probe temperature reaches the target it will beep 3 times and the probe temperature display will
flash.
Connection via Bluetooth•
®
: This icon will illuminate when a Bluetooth
®
connection is established
between the Clermont Pellet Grill and a mobile device.
Connection via WiFi:• This icon will illuminate when a WiFi or Cloud connection is established between
the Clermont Pellet Grill and a mobile device.
Auger on:• Illuminates when the auger is running. The auger will turn on or off in regular operation to
regulate the chamber temperature.
Loading ...
Loading ...
Loading ...