NuWave 31820 Electric Skillet

User Manual - Page 7

For 31820.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Owners Manual
• 7
OPERATION
1. Place your skillet on a clean, at, dry surface.
2. Make sure the control knob is facing upward and in the“OFF” position.
Insert temperature probe into the receptacle located on the side of the unit.
3. Plug cord into an electrical outlet.
4. Turn temperature control knob to desired setting, the indicator
light will illuminate.
5. Your skillet will preheat for approximately 3-8 minutes,depending on the
desired temperature setting. For faster heating, cover the
NuWave™ Electric Skillet with lid.
6. Place food in the skillet.
NOTE: After preheating, do not leave skillet on without any food inside;
over time, this can damage the NuWave™ Electric Skillet.
7. Cook food as directed or until desired results are achieved.
8. After use, turn the temperature control knob to the “OFF” position and
unplug your skillet.
NOTE: Probe may remain hot after use. Please use caution.
CLEANING AND MAINTENANCE
CAUTION: To prevent personal injury or electric shock, always remove the
temperature control probe before cleaning. Do not immerse temperature probe,
cord or plug in water or other liquid.
1. Turn the temperature probe to the “OFF” position and unplug unit from outlet.
2. Allow unit to cool before cleaning.
3. Once unit has cooled, remove the temperature probe.
4. The temperature probe and base are not immersible. Simply wipe it down
with a clean cloth. Skillet is not dishwasher safe.
5. To clean skillet, rst remove excess food and oil with a clean cloth. Place
glass lid on the top shelf of a dishwasher or wash with warm soapy water,
using a non abrasive cloth.
6. Dry thoroughly when clean.
NOTE: DO NOT USE HARSH ABRASIVES.
IMPORTANT - Do not immerse unit in water or attempt
to cycle through dishwasher. The outer surface may
be cleaned by wiping carefully with a damp dishcloth
or sponge. Make sure unit has cooled completely
prior to cleaning.
General Operating Instructions:
• Place the NuWave™ Electric Skillet on a stable, level surface.
• Never use the NuWave™ Electric Skillet on a ammable surface (e.g. table cloth, carpet, etc.).
• Maintain a minimum distance of 3-5 inches from walls and other objects, appliances, etc.
• Do not use the NuWave™ Electric Skillet in the proximity of open res, heaters or
other heat sources.
• Do not place on a stove top.
• Ensure that the power cable is not damaged nor compressed beneath the
NuWave™ Electric Skillet
• The power cable must not come into contact with sharp edges and/or hot surfaces.
• Prior to connecting the NuWave™ Electric Skillet, conrm that the voltage
needs indicated in this manual correspond to the voltage supply in your oulet.
A wrong connection may damage the unit and possible injury to persons.
• In the event that damage to the unit is observed, immediately disconnect the
NuWave™ Electric Skillet from the power supply.
Loading ...
Loading ...
Loading ...