Loading ...
Loading ...
Loading ...
Owner’s Manual
• 5
IMPORTANT INSTRUCTION
1. Add only enough oil to coat the bottom of the skillet. Do not use larger
amounts of oil.
2. The steam vent in the cover should always be placed to the back of the
skillet. Lift the lid from the back to the front to prevent steam burns.
3. Use pot holders to lift lid or move skillet.
4. Do not lift or move skillet while cooking.
5. Never immerse the temperature probe in water or any other liquid.
6. Temperature probe must always be in the “OFF” position before the unit is
unplugged.
7. Do not knock or drop the temperature probe as this can damage the probe.
NOTE: Probe can be hot.
ASSEMBLY INSTRUCTION
1. Carefully unpack the skillet, make sure the support legs are secure in place.
2. Rinse the skillet base and glass cover in warm, soapy water. Rinse well and
dry thoroughly.
3. Place skillet base on a clean, at, dry surface.
4. Place the cover on top of the base according to directions.
5. Make sure the control knob is facing upward and in the ”OFF” position.
Insert temperature probe into the receptacle located on the side of the unit.
6. Plug in unit.
7. Your skillet is now ready for use.
SAVE THESE INSTRUCTIONS
18. If a long detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord or extension cord should be at
least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a
grounding 3-wire cord.
3) The longer cord should be arranged so that it does not drape over the
countertop or table top where it can be pulled on by children or tripped
over unintentionally.
19. Do not use appliance for other than intended use.
WARNING
WARNING: All items in the Skillet can get very hot during
cooking. Please be careful when removing these items from
the unit. Always wear oven mitts or use pot holders. Skillet
may retain residual heat after food has been removed. Allow
everything to cool completely before cleaning.
Electric shock hazard. Use with adequate electrical system.
Do not use if cord or plug is damaged.
Loading ...
Loading ...
Loading ...