Loading ...
Loading ...
Loading ...
Installation Instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter phtg in these situations because
disconnecting of the power cord places undue strain on
the adapter and leads to eventual taihu'e of the adapter
ground terminal, The customer should have the two-
prong wall receptacle replaced with a three-prong
(grotmding) receptacle by a qualified electrician
heft)re using the appliance.
The installation of appliances designed fin" mobile
home installation must confl)rm with the Manufactured
Home Construction and Safety Standard, Title 24 CFR,
Part 3280 (%rmerly the Federal Standard %r Mobile
Home Construction and Satiety, Title 24, HUD, Part
980) o_, when such standard is not ai)plicable, the
Standard for Mamdhctured Home Installations, latest
edition (Mmmthcmred Home Sites, Commtmities and
Set-/Jps), ANSI A225.1, latest edition, or with local
codes, In Canada, mobile home installation must be
in accordance with the cmTent CAN/CSA Z240/MH
Mobile Home Installation Code.
Electric Disconnect
• i,ocate disconnect plug on the range back.
• Pinch sides of connector and pull out of range back.
[] SEAL THE OPENINGS
Seal am, ol_enings, in the wall behind the range and in the
floor trader the range, when hookuI)s, are completed.
[] ASSEMBLE SURFACE BURNERS
[] _ssemble the side bm'ners as shown.
Side
Grate
(,-"--'_4_--- Burnercap
Burnerbase -_'_=_J
(not removable - _r_'--- Electrode
on side burners}
_ssemble the center burner; Make sure that the
center griddle sits square and lexel between the
side grates,
Center
Griddle
_ .._...... Burner head
and cap
assembly
O "_" Electrode
-& CAUTION: oo not operate the burner
without all burner parts in place.
0val beadand cap
Medium burner assembly_ Smallburner
beadand cap [ t beadandcap
O .|
Frontof range
Largeburner Extralargeburner
headandcap beadand cap
Place the bm'ner caps on the cooktop. Make sm'e
that the caps are placed in the correct locations.
There is one oval (center) head and cap asselllblv,
one small cap, one medium cap, one lalge cap, and
one extra lmge cap.
%
Electrode
Make sure the slot in the burner head is
positioned over the electrode.
50
Loading ...
Loading ...
Loading ...