Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
6
B
Hinge Screws
4. Grill Head to Cart
• This step requires two people to lift and
position grill head onto cart.
• If not already done, remove the tie wraps and
packing material from regulator hose, side
burner valve and igniter wire. Pull hose and
igniter wire out to side of grill head.
• Carefully lower the grill head onto the cart.
Make sure the regulator hose and igniter wire
are hanging outside the cart. Open lid and
attach head to cart with (4) M6x13 screws and
M6 compression washers. (See A & B)
• Align back rail holes with holes on side panels
and firebox. Attach back rail with (4) M4x10
screws. (See C)
M4X10 screw
Qty: 4 pcs
M6X13 screw
Qty: 4 pcs
M6 compression washer
Qty: 4 pcs
A B C
5. Left Side Shelf
• Attach fascia to left side shelf with (2) M5x10
screws, and M5 flat washers.
• Attach Shelf Support Angle Bar to side shelf
and fascia with (4) M4x10 screws
• Hang left side shelf onto the brackets on left
side of firebox.
• Attach shelf to firebox as follows:
From inside to outside of firebox with (2)
M6x13 screws and M6 compression washers..
IMPORTANT: Put side panel and control panel
alignment before locking.
• From outside to inside of rebox with (2)
M6x13 screws and (1)M4x10 screw.
M5X10 screw
Qty: 2 pcs
M5 flat washer
Qty: 2 pcs
M4X10 screw
Qty: 5pc
M6X13 screws
Qty: 4 pcs
M6 compression washer
Qty: 2 pcs
Loading ...
Loading ...
Loading ...