Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
12
LP Tank Exchange
• Many retailers that sell grills offer you the option of
replacing your empty LP tank through an exchange
service. Use only those reputable exchange companies
that inspect, precision fill, test and certify their cylinders.
Exchange your tank only for an OPD safety feature-
equipped tank as described in the "LP Tank" section of
this manual.
• Always keep new and exchanged LP tanks in upright
position during use, transit or storage.
• Leak test new and exchanged LP tanks BEFORE
connecting to grill.
LP Tank Leak Test
For your safety
• Leak test must be repeated each time LP tank is
exchanged or refilled.
• Do not smoke during leak test.
• Do not use an open ame to check for gas leaks.
• Grill must be leak tested outdoors in a well-ventilated
area, away from ignition sources such as gas fired or
electrical appliances. During leak test, keep grill away
from open flames or sparks.
• Use a clean paintbrush and a 50/50 mild soap and
water solution.
Brush soapy solution onto areas indicated by arrows in
figure below. Leaks are indicated by growing bubbles.
WARNING
If “growing” bubbles appear do not use or move the LP
tank. Contact an LP gas supplier or your fire department!
Do not use household cleaning agents. Damage to the
gas train components (valve/hose/regulator) can result.
Connecting Regulator To The LP Tank
1. LP tank must be properly secured onto grill.
(Refer to assembly section.)
2. Turn all control knobs to the OFF position.
3. Turn LP tank OFF by turning OPD hand wheel
clockwise to a full stop.
4. Remove the protective cap from LP tank valve.
Always use cap and strap supplied with valve.
5. Hold regulator and insert nipple into LP tank valve.
Hand-tighten the coupling nut, holding regulator in
a straight line with LP tank valve so as not to cross-
thread the connection.
OPD Hand Wheel
Type 1 outlet with
thread on outside
Strap and Cap
Safety Relief Valve
Do not insert a POL transport
plug (plastic part with external
threads) into the type 1 valve
outlet. It will defeat the
Safety Relief Valve feature.
Nipple has to be centered
into the LP tank valve.
Loading ...
Loading ...
Loading ...