DWC-2000 User Manual

Loading ...

D-Link DWC-2000 User Manual 251

Section 8 - Maintenance

Restoring Factory Default Settings

Path: Maintenance > Firmware > Soft Reboot

If you reset a wireless controller to its factory default settings, it returns to the state when it was new — all

changes you made to the default conguration are lost. Examples of settings that get restored include critical

things you need to get online, such as login password, SSID, IP addresses, and wireless security keys.

There are two ways to restore a wireless controller to its original factory default settings:

• Use the reset button on the back of the wireless controller (see “Using the Reset Button to Restore

Default Settings” on page 258).

• Use the web management interface instructions below.

1. Click Maintenance > Firmware > Soft Reboot.

2. Next to Factory Default settings, click the Default button.

3. At the conrmation message, click OK to restore factory default settings; or click Cancel to retain your

current settings.

Note: After restoring the factory default conguration, the wireless controller’s default LAN IP address is 192.168.10.1,

the default login user name is admin, and the default login password is admin.

Loading ...

D-Link DWC-2000 Wireless Controller