DWC-2000 User Manual

Loading ...

D-Link DWC-2000 User Manual 119

Section 5 - Advanced Network Conguration

Field Description

DHCPv6

Status

Toggle On to enable DHCPv6. It is disable in default.

If DHCPv6 is Enabled (ON)

Mode

There are two ways to obtain an appropriate address for the gateway. You must select

one of the following:

• Stateless Address Auto Conguration: This option will use router advertisement

for address assignment. The IPv6 RADVD protocol will be enabled to advertise this

controller as a DHCPv6 client.

• Stateful Address Auto Conguration: Select this option to request an IPv6

address from any available DHCPv6 servers available on the ISP.

Domain Name Name of the domain (Optional) for this DHCPv6 server.

Server Preference

This is used by the stateless DHCP to indicate the preference level of this DHCP server.

DHCPv6 clients will pick up the DHCPv6 server which has highest preference value. The

preference value must be a decimal integer and be between 0 and 255 (inclusive).

DNS Servers

Select one of the following options for DNS servers for the DHCPv6 clients

• Use DNS Proxy: On button to enable DNS proxy on this LAN, or O this button to

disable this proxy. When this feature is enabled, the controller will act as a proxy for

all DNS requests and communicate with the ISP’s DNS servers (as congured in the

Option settings page)

• Use DNS from ISP: This option allows the ISP to dene the DNS servers (primary/

secondary) for the LAN DHCP client

• Use below: if selected, the below congured Primary and Secondary DNS servers

are used for DHCPv6 clients.

Primary DNS Server Enter the primary DNS server address.

Secondary DNS Server Enter the secondary DNS server address.

Lease/Rebind Time Duration (in seconds) for which IP addresses will be leased to clients.

Prex Delegation On/O button for Enable/Disable Prex Delegation.

Loading ...

D-Link DWC-2000 Wireless Controller